欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

手把手教你實現idea中配置國內源

 更新時間:2023年07月12日 11:16:37   作者:Dragon_Martin  
idea的國內源配置十分重要,能夠提升程序開發的效率而且也是減少bug的一種有效防范,本文就來介紹一下idea中配置國內源,具有一定的參考價值,感興趣的可以了解一下

前言

對于新手的Java程序員來說,idea的國內源配置十分重要,能夠提升程序開發的效率而且也是減少bug的一種有效防范,但是沒有教學自己是很難摸索的,接下來就讓我們手把手的一起安裝吧。

一、idea配置文件國內源是什么?

我們?cè)陧?xiàng)目使用maven支持的時候,在配置pom.xml依賴包,下載的時候會變卡,尤其是配置springboot等框架的時候,比較容易滋生問題,我們可以配置國內maven源提升效率。

二、使用步驟

首先建立一個maven項目

首先點擊film->setting 然后進行搜索 maven ,如圖所示點擊maven

然后勾選 User settings file 和 local repository override 全部勾選中

在對應的盤里面搜索看有沒有 settings.xml ,如果有就替換其中的國內源即可,如果沒有將下列代碼拷入到記事本然后復制到對應的目錄下即可,然后重新啟動idea即可完成配置.

##2.讀入數據
代碼如下(示例):
<?xml version="1.0" encoding="UTF-8"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->
<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.conf}/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
  <!-- localRepository
   | The path to the local repository maven will use to store artifacts.
   |
   | Default: ${user.home}/.m2/repository
  <localRepository>/path/to/local/repo</localRepository>
  -->
  <!-- interactiveMode
   | This will determine whether maven prompts you when it needs input. If set to false,
   | maven will use a sensible default value, perhaps based on some other setting, for
   | the parameter in question.
   |
   | Default: true
  <interactiveMode>true</interactiveMode>
  -->
  <!-- offline
   | Determines whether maven should attempt to connect to the network when executing a build.
   | This will have an effect on artifact downloads, artifact deployment, and others.
   |
   | Default: false
  <offline>false</offline>
  -->
  <!-- pluginGroups
   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
   |-->
  <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
    <pluginGroup>com.your.plugins</pluginGroup>
    -->
  </pluginGroups>
  <!-- proxies
   | This is a list of proxies which can be used on this machine to connect to the network.
   | Unless otherwise specified (by system property or command-line switch), the first proxy
   | specification in this list marked as active will be used.
   |-->
  <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
    <proxy>
      <id>optional</id>
      <active>true</active>
      <protocol>http</protocol>
      <username>proxyuser</username>
      <password>proxypass</password>
      <host>proxy.host.net</host>
      <port>80</port>
      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
    -->
  </proxies>
  <!-- servers
   | This is a list of authentication profiles, keyed by the server-id used within the system.
   | Authentication profiles can be used whenever maven must make a connection to a remote server.
   |-->
  <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     |
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
     |       used together.
     |
    <server>
      <id>deploymentRepo</id>
      <username>repouser</username>
      <password>repopwd</password>
    </server>
    -->
    <!-- Another sample, using keys to authenticate.
    <server>
      <id>siteServer</id>
      <privateKey>/path/to/private/key</privateKey>
      <passphrase>optional; leave empty if not used.</passphrase>
    </server>
    -->
  </servers>
  <!-- mirrors
   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
   |
   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
   | However, this repository may have problems with heavy traffic at times, so people have mirrored
   | it to several places.
   |
   | That repository definition will have a unique id, so we can create a mirror reference for that
   | repository, to be used as an alternate download site. The mirror site will be the preferred
   | server for that repository.
   |-->
  <mirrors>
   <mirror>
        <id>alimaven</id>
        <name>aliyun maven</name>
        <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
        <mirrorOf>central</mirrorOf>        
      </mirror>
    <!-- mirror
     | Specifies a repository mirror site to use instead of a given repository. The repository that
     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
     |
    <mirror>
      <id>mirrorId</id>
      <mirrorOf>repositoryId</mirrorOf>
      <name>Human Readable Name for this Mirror.</name>
      <url>http://my.repository.com/repo/path</url>
    </mirror>
     -->
  </mirrors>
  <!-- profiles
   | This is a list of profiles which can be activated in a variety of ways, and which can modify
   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
   | specific paths and repository locations which allow the build to work in the local environment.
   |
   | For example, if you have an integration testing plugin - like cactus - that needs to know where
   | your Tomcat instance is installed, you can provide a variable here such that the variable is
   | dereferenced during the build process to configure the cactus plugin.
   |
   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
   | section of this document (settings.xml) - will be discussed later. Another way essentially
   | relies on the detection of a system property, either matching a particular value for the property,
   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
   | Finally, the list of active profiles can be specified directly from the command line.
   |
   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
   |       repositories, plugin repositories, and free-form properties to be used as configuration
   |       variables for plugins in the POM.
   |
   |-->
  <profiles>
    <!-- profile
     | Specifies a set of introductions to the build process, to be activated using one or more of the
     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
     | or the command line, profiles have to have an ID that is unique.
     |
     | An encouraged best practice for profile identification is to use a consistent naming convention
     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
     | This will make it more intuitive to understand what the set of introduced profiles is attempting
     | to accomplish, particularly when you only have a list of profile id's for debug.
     |
     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
    <profile>
      <id>jdk-1.4</id>
      <activation>
        <jdk>1.4</jdk>
      </activation>
      <repositories>
        <repository>
          <id>jdk14</id>
          <name>Repository for JDK 1.4 builds</name>
          <url>http://www.myhost.com/maven/jdk14</url>
          <layout>default</layout>
          <snapshotPolicy>always</snapshotPolicy>
        </repository>
      </repositories>
    </profile>
    -->
    <!--
     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
     | might hypothetically look like:
     |
     | ...
     | <plugin>
     |   <groupId>org.myco.myplugins</groupId>
     |   <artifactId>myplugin</artifactId>
     |
     |   <configuration>
     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
     |   </configuration>
     | </plugin>
     | ...
     |
     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
     |       anything, you could just leave off the <value/> inside the activation-property.
     |
    <profile>
      <id>env-dev</id>
      <activation>
        <property>
          <name>target-env</name>
          <value>dev</value>
        </property>
      </activation>
      <properties>
        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
      </properties>
    </profile>
    -->
  </profiles>
  <!-- activeProfiles
   | List of profiles that are active for all builds.
   |
  <activeProfiles>
    <activeProfile>alwaysActiveProfile</activeProfile>
    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
  </activeProfiles>
  -->
</settings>

創建 settings.xml記事本文件即可,拷貝到對應路徑下面即可.

總結

到此這篇關于手把手教你實現idea中配置國內源的文章就介紹到這了,更多相關idea配置國內源內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!           

相關文章

  • Eclipse開發JavaWeb項目配置Tomcat的方法步驟

    Eclipse開發JavaWeb項目配置Tomcat的方法步驟

    本文主要介紹了Eclipse開發JavaWeb項目配置Tomcat的方法步驟,首先介紹eclipse開發JavaWeb項目需要配置的相關環境,使用tomcat軟件在本地搭建服務器,然后再在eclipse環境下配置tomcat,感興趣的可以了解一下
    2021-08-08
  • 通過實例了解cookie機制特性及使用方法

    通過實例了解cookie機制特性及使用方法

    這篇文章主要介紹了通過實例了解cookie機制特性及使用方法,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下
    2020-09-09
  • java中實現兼容ie6 7 8 9的spring4+websocket

    java中實現兼容ie6 7 8 9的spring4+websocket

    這篇文章主要介紹了java中實現兼容ie6 7 8 9的spring4+websocket程序代碼,十分的簡單實用,有需要的小伙伴可以參考下。
    2015-06-06
  • Java使用Condition實現精準喚醒線程詳解

    Java使用Condition實現精準喚醒線程詳解

    這篇文章主要為大家詳細介紹了Java如何使用Condition實現精準喚醒線程效果,文中的示例代碼講解詳細,感興趣的小伙伴可以跟隨小編一起了解一下
    2023-02-02
  • SpringBoot集成PageHelper及使用方法詳解

    SpringBoot集成PageHelper及使用方法詳解

    這篇文章主要介紹了SpringBoot集成PageHelper及使用方法詳解,PageHelper 是一個開源的 Java 分頁插件,它可以幫助開發者簡化分頁操作,本文提供部分相關代碼,需要的朋友可以參考下
    2023-10-10
  • java啟動如何設置JAR包內存大小

    java啟動如何設置JAR包內存大小

    這篇文章主要介紹了java啟動如何設置JAR包內存大小問題,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教
    2023-02-02
  • HashSet如何保證元素不重復(面試必問)

    HashSet如何保證元素不重復(面試必問)

    HashSet 不保證集合的迭代順序,但允許插入 null 值,也就是說它可以將集合中的重復元素自動過濾掉,保證存儲在 HashSet 中的元素都是唯一的,這篇文章主要介紹了HashSet如何保證元素不重復(面試必問),需要的朋友可以參考下
    2021-12-12
  • Java環境中MyBatis與Spring或Spring MVC框架的集成方法

    Java環境中MyBatis與Spring或Spring MVC框架的集成方法

    和MyBatis類似,Spring或者Spring MVC框架在Web應用程序的運作中同樣主要負責處理數據庫事務,這里我們就來看一下Java環境中MyBatis與Spring或Spring MVC框架的集成方法
    2016-06-06
  • Java中的對象和對象引用實例淺析

    Java中的對象和對象引用實例淺析

    這篇文章主要介紹了Java中的對象和對象引用,實例分析了對象與對象引用的概念與相關使用技巧,需要的朋友可以參考下
    2015-05-05
  • Springboot3+Redis實現消息隊列的多種方法小結

    Springboot3+Redis實現消息隊列的多種方法小結

    本文主要介紹了Springboot3+Redis實現消息隊列的多種方法小結,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2025-03-03

最新評論