關于Java并發編程中線程間協作的兩種方式
引言
在前面我們將了很多關于同步的問題,然而在現實中,需要線程之間的協作。
比如說最經典的生產者-消費者模型:當隊列滿時,生產者需要等待隊列有空間才能繼續往里面放入商品,而在等待的期間內,生產者必須釋放對臨界資源(即隊列)的占用權。
因?yàn)樯a(chǎn)者如果不釋放對臨界資源的占用權,那么消費者就無法消費隊列中的商品,就不會讓隊列有空間,那么生產者就會一直無限等待下去。
因此,一般情況下,當隊列滿時,會讓生產者交出對臨界資源的占用權,并進入掛起狀態。然后等待消費者消費了商品,然后消費者通知生產者隊列有空間了。
同樣地,當隊列空時,消費者也必須等待,等待生產者通知它隊列中有商品了。這種互相通信的過程就是線程間的協作。
今天我們就來探討一下Java中線程協作的最常見的兩種方式:利用Object.wait()、Object.notify()和使用Condition
一.wait()、notify()和notifyAll()
wait()、notify()和notifyAll()是Object類中的方法:
/**
* Wakes up a single thread that is waiting on this object's
* monitor. If any threads are waiting on this object, one of them
* is chosen to be awakened. The choice is arbitrary and occurs at
* the discretion of the implementation. A thread waits on an object's
* monitor by calling one of the wait methods
*/
public final native void notify();
/**
* Wakes up all threads that are waiting on this object's monitor. A
* thread waits on an object's monitor by calling one of the
* wait methods.
*/
public final native void notifyAll();
/**
* Causes the current thread to wait until either another thread invokes the
* {@link java.lang.Object#notify()} method or the
* {@link java.lang.Object#notifyAll()} method for this object, or a
* specified amount of time has elapsed.
* <p>
* The current thread must own this object's monitor.
*/
public final native void wait(long timeout) throws InterruptedException;從這三個方法的文字描述可以知道以下幾點信息:
1)wait()、notify()和notifyAll()方法是本地方法,并且為final方法,無法被重寫。
2)調用某個對象的wait()方法能讓當前線程阻塞,并且當前線程必須擁有此對象的monitor(即鎖)
3)調用某個對象的notify()方法能夠喚醒一個正在等待這個對象的monitor的線程,如果有多個線程都在等待這個對象的monitor,則只能喚醒其中一個線程;
4)調用notifyAll()方法能夠喚醒所有正在等待這個對象的monitor的線程;
有朋友可能會有疑問:為何這三個不是Thread類聲明中的方法,而是Object類中聲明的方法(當然由于Thread類繼承了Object類,所以Thread也可以調用者三個方法)?
其實這個問題很簡單,由于每個對象都擁有monitor(即鎖),所以讓當前線程等待某個對象的鎖,當然應該通過這個對象來操作了。
而不是用當前線程來操作,因?yàn)楫?dāng)前線程可能會等待多個線程的鎖,如果通過線程來操作,就非常復雜了。
上面已經提到,如果調用某個對象的wait()方法,當前線程必須擁有這個對象的monitor(即鎖),因此調用wait()方法必須在同步塊或者同步方法中進行(synchronized塊或者synchronized方法)。
調用某個對象的wait()方法,相當于讓當前線程交出此對象的monitor,然后進入等待狀態,等待后續再次獲得此對象的鎖(Thread類中的sleep方法使當前線程暫停執行一段時間,從而讓其他線程有機會繼續執行,但它并不釋放對象鎖);
notify()方法能夠喚醒一個正在等待該對象的monitor的線程,當有多個線程都在等待該對象的monitor的話,則只能喚醒其中一個線程,具體喚醒哪個線程則不得而知。
同樣地,調用某個對象的notify()方法,當前線程也必須擁有這個對象的monitor,因此調用notify()方法必須在同步塊或者同步方法中進行(synchronized塊或者synchronized方法)。
nofityAll()方法能夠喚醒所有正在等待該對象的monitor的線程,這一點與notify()方法是不同的。
這里要注意一點:notify()和notifyAll()方法只是喚醒等待該對象的monitor的線程,并不決定哪個線程能夠獲取到monitor。
舉個簡單的例子:假如有三個線程Thread1、Thread2和Thread3都在等待對象objectA的monitor,此時Thread4擁有對象objectA的monitor,當在Thread4中調用objectA.notify()方法之后,Thread1、Thread2和Thread3只有一個能被喚醒。
注意,被喚醒不等于立刻就獲取了objectA的monitor。假若在Thread4中調用objectA.notifyAll()方法,則Thread1、Thread2和Thread3三個線程都會被喚醒,至于哪個線程接下來能夠獲取到objectA的monitor就具體依賴于操作系統的調度了。
上面尤其要注意一點,一個線程被喚醒不代表立即獲取了對象的monitor,只有等調用完notify()或者notifyAll()并退出synchronized塊,釋放對象鎖后,其余線程才可獲得鎖執行。
下面看一個例子就明白了:
public class Test {
public static Object object = new Object();
public static void main(String[] args) {
Thread1 thread1 = new Thread1();
Thread2 thread2 = new Thread2();
thread1.start();
try {
Thread.sleep(200);
} catch (InterruptedException e) {
e.printStackTrace();
}
thread2.start();
}
static class Thread1 extends Thread{
@Override
public void run() {
synchronized (object) {
try {
object.wait();
} catch (InterruptedException e) {
}
System.out.println("線程"+Thread.currentThread().getName()+"獲取到了鎖");
}
}
}
static class Thread2 extends Thread{
@Override
public void run() {
synchronized (object) {
object.notify();
System.out.println("線程"+Thread.currentThread().getName()+"調用了object.notify()");
}
System.out.println("線程"+Thread.currentThread().getName()+"釋放了鎖");
}
}
}無論運行多少次,運行結果必定是:
線程Thread-1調用了object.notify()
線程Thread-1釋放了鎖
線程Thread-0獲取到了鎖
二.Condition
Condition是在java 1.5中才出現的,它用來替代傳統的Object的wait()、notify()實現線程間的協作,相比使用Object的wait()、notify(),使用Condition1的await()、signal()這種方式實現線程間協作更加安全和高效。因此通常來說比較推薦使用Condition,在阻塞隊列那一篇博文中就講述到了,阻塞隊列實際上是使用了Condition來模擬線程間協作。
- Condition是個接口,基本的方法就是await()和signal()方法;
- Condition依賴于Lock接口,生成一個Condition的基本代碼是lock.newCondition()
- 調用Condition的await()和signal()方法,都必須在lock保護之內,就是說必須在lock.lock()和lock.unlock之間才可以使用
Conditon中的await()對應Object的wait();
Condition中的signal()對應Object的notify();
Condition中的signalAll()對應Object的notifyAll()。
三.生產者-消費者模型的實現
1.使用Object的wait()和notify()實現:
public class Test {
private int queueSize = 10;
private PriorityQueue<Integer> queue = new PriorityQueue<Integer>(queueSize);
public static void main(String[] args) {
Test test = new Test();
Producer producer = test.new Producer();
Consumer consumer = test.new Consumer();
producer.start();
consumer.start();
}
class Consumer extends Thread{
@Override
public void run() {
consume();
}
private void consume() {
while(true){
synchronized (queue) {
while(queue.size() == 0){
try {
System.out.println("隊列空,等待數據");
queue.wait();
} catch (InterruptedException e) {
e.printStackTrace();
queue.notify();
}
}
queue.poll(); //每次移走隊首元素
queue.notify();
System.out.println("從隊列取走一個元素,隊列剩余"+queue.size()+"個元素");
}
}
}
}
class Producer extends Thread{
@Override
public void run() {
produce();
}
private void produce() {
while(true){
synchronized (queue) {
while(queue.size() == queueSize){
try {
System.out.println("隊列滿,等待有空余空間");
queue.wait();
} catch (InterruptedException e) {
e.printStackTrace();
queue.notify();
}
}
queue.offer(1); //每次插入一個元素
queue.notify();
System.out.println("向隊列取中插入一個元素,隊列剩余空間:"+(queueSize-queue.size()));
}
}
}
}
}2.使用Condition實現
public class Test {
private int queueSize = 10;
private PriorityQueue<Integer> queue = new PriorityQueue<Integer>(queueSize);
private Lock lock = new ReentrantLock();
private Condition notFull = lock.newCondition();
private Condition notEmpty = lock.newCondition();
public static void main(String[] args) {
Test test = new Test();
Producer producer = test.new Producer();
Consumer consumer = test.new Consumer();
producer.start();
consumer.start();
}
class Consumer extends Thread{
@Override
public void run() {
consume();
}
private void consume() {
while(true){
lock.lock();
try {
while(queue.size() == 0){
try {
System.out.println("隊列空,等待數據");
notEmpty.await();
} catch (InterruptedException e) {
e.printStackTrace();
}
}
queue.poll(); //每次移走隊首元素
notFull.signal();
System.out.println("從隊列取走一個元素,隊列剩余"+queue.size()+"個元素");
} finally{
lock.unlock();
}
}
}
}
class Producer extends Thread{
@Override
public void run() {
produce();
}
private void produce() {
while(true){
lock.lock();
try {
while(queue.size() == queueSize){
try {
System.out.println("隊列滿,等待有空余空間");
notFull.await();
} catch (InterruptedException e) {
e.printStackTrace();
}
}
queue.offer(1); //每次插入一個元素
notEmpty.signal();
System.out.println("向隊列取中插入一個元素,隊列剩余空間:"+(queueSize-queue.size()));
} finally{
lock.unlock();
}
}
}
}
}到此這篇關于關于Java并發編程中線程間協作的兩種方式的文章就介紹到這了,更多相關Java并發編程線程間協作內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
IDEA創建Servlet并配置web.xml的實現
這篇文章主要介紹了IDEA創建Servlet并配置web.xml的實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2020-10-10
Springboot Logback日志多文件輸出方式(按日期和大小分割)
這篇文章主要介紹了Springboot Logback日志多文件輸出方式(按日期和大小分割),具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-05-05
SpringBoot解決406錯誤之返回對象缺少Getter/Setter方法引發的問題
在Spring Boot開發中,接口請求返回?cái)?shù)據是系統交互的重要環節,然而,開發過程中常常會遇到由于數據類型或返回格式問題導致的錯誤,其中最常見的就是406 Not Acceptable異常,本篇文章以實際的案例出發,詳細分析在POST請求中產生406錯誤的原因2024-11-11
java自定義異常以及throw和throws關鍵字用法
這篇文章主要介紹了java自定義異常以及throw和throws關鍵字用法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2021-02-02
Java加載properties文件實現方式詳解
這篇文章主要介紹了Java加載properties文件實現方式詳解,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-07-07
RocketMQ4.5.2 修改mqnamesrv 和 mqbroker的日志路徑操作
這篇文章主要介紹了RocketMQ 4.5.2 修改mqnamesrv 和 mqbroker的日志路徑操作,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2021-07-07
Springboot如何實現Web系統License授權認證
這篇文章主要介紹了Springboot如何實現Web系統License授權認證,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-05-05

