Spring運行環境Environment的解析
Spring運行環境
Spring在創建容器時,會創建Environment環境對象,用于保存spring應用程序的運行環境相關的信息。在創建環境時,需要?jiǎng)?chuàng)建屬性源屬性解析器,會解析屬性值中的占位符,并進行替換。
創建環境時,會通過System.getProperties()獲取JVM系統屬性,會通過System.getenv()獲取JVM環境屬性。
Environment在Spring中的使用
spring在創建容器時需要指定需要加載配置文件路徑,在加載配置文件路徑時,需要解析字符串中的占位符。解析占位符時,需要環境信息,此時會創建一個標準的spring運行環境,即創建StandardEnvironment對象。
1、調用setConfigLocations方法給spring設置需要加載的配置文件的路徑,源碼如下:
// 將配置文件的路徑放到configLocations 字符串?dāng)?shù)組中
public void setConfigLocations(@Nullable String... locations) {
if (locations != null) {
Assert.noNullElements(locations, "Config locations must not be null");
// 設置了幾個配置文件,就創一個多長的字符串?dāng)?shù)組,用來存放配置文件的路徑
this.configLocations = new String[locations.length];
for (int i = 0; i < locations.length; i++) {
//解析路徑,將解析的路徑存放到字符串?dāng)?shù)組中
this.configLocations[i] = resolvePath(locations[i]).trim();
}
}
else {
this.configLocations = null;
}
}2、調用resolvePath方法解析配置文件路徑中的占位符,源碼如下:
// 解析給定的路徑,必要時用相應的環境屬性值替換占位符。應用于配置位置。
protected String resolvePath(String path) {
// 獲取環境,解決所需的占位符
return getEnvironment().resolveRequiredPlaceholders(path);
}3、調用getEnvironment方法獲取環境信息,如果沒有指定spring的環境信息,通過createEnvironment獲取默認的環境,也就是spring的標準環境。getEnvironment方法源碼如下:
// 獲取spring的環境信息,如果沒有指定,獲取到的時默認的環境
@Override
public ConfigurableEnvironment getEnvironment() {
if (this.environment == null) {
this.environment = createEnvironment();
}
return this.environment;
}4、調用createEnvironment方法獲取默認的環境(spring的標準環境),使用StandardEnvironment無參構造創建對象。源碼如下:
// 獲取默認的環境
protected ConfigurableEnvironment createEnvironment() {
return new StandardEnvironment();
}Spring的標準環境StandardEnvironment
Spring的標準環境StandardEnvironment適合在非web應用程序中使用。
在AbstractApplicationContext類的createEnvironment方法中會調用StandardEnvironment的無參構造方法創建環境對象。
1、調用StandardEnvironment的無參構造方法,該方法中沒有任何邏輯處理,源碼如下:
public StandardEnvironment() {}2、StandardEnvironment類是AbstractEnvironment抽象類的子類,因此使用StandardEnvironment的無參構造創建對象時會調用父類AbstractEnvironment的無參構造方法。AbstractEnvironment在下文中有描述。
3、重寫AbstractEnvironment類中的customizePropertySources方法,用于設置屬性源,該方法通過父類進行回調。
該方法會獲取JVM系統屬性和環境屬性并設置到MutablePropertySources類中存放屬性源的CopyOnWriteArrayList中。
1)JVM系統屬性通過System.getProperties()獲?。?br />2)環境屬性通過System.getenv()獲取。
StandardEnvironment類中customizePropertySources方法源碼如下:
// 設置屬性源,JVM系統屬性中的屬性將優先于環境屬性中的屬性。
@Override
protected void customizePropertySources(MutablePropertySources propertySources) {
/**
* 1、MutablePropertySources類中使用CopyOnWriteArrayList存儲屬性源,集合中存儲PropertySource的子類
* 2、PropertiesPropertySource是PropertySource的子類,PropertySource類中有三個成員變量
* 1)logger:日志對象
* 2)name:用來保存屬性源名稱
* 3)source:用來保存屬性源中的屬性
*/
// getSystemProperties():通過System.getProperties()獲取JVM屬性鍵值對,并轉成Map
propertySources.addLast(
new PropertiesPropertySource(SYSTEM_PROPERTIES_PROPERTY_SOURCE_NAME, getSystemProperties()));
// getSystemEnvironment():通過System.getenv()獲取環境屬性鍵值對,并撰成Map
propertySources.addLast(
new SystemEnvironmentPropertySource(SYSTEM_ENVIRONMENT_PROPERTY_SOURCE_NAME, getSystemEnvironment()));
}4、StandardEnvironment類中設置了兩個靜態常量:
1)systemEnvironment:以系統環境為屬性源
2)systemProperties:以JVM系統屬性為屬性源
/** System environment property source name: {@value}.
?* 系統環境屬性源名:{@value}。 */
public static final String SYSTEM_ENVIRONMENT_PROPERTY_SOURCE_NAME = "systemEnvironment";
/** JVM system properties property source name: {@value}.
?* JVM系統屬性屬性源名稱:{@value}。*/
public static final String SYSTEM_PROPERTIES_PROPERTY_SOURCE_NAME = "systemProperties";Spring的抽象環境AbstractEnvironment
StandardEnvironment類是AbstractEnvironment抽象類的子類,因此使用StandardEnvironment的無參構造創建對象時會調用父類AbstractEnvironment的無參構造方法。
1、AbstractEnvironment的無參構造方法,該方法會調用AbstractEnvironment的有參構造方法,源碼如下:
public AbstractEnvironment() {
this(new MutablePropertySources());
}2、AbstractEnvironment的有參構造
該方法的主要做三件事:
1)給成員變量賦值
2)創建屬性源屬性解析器
3)調用子類重寫的customizePropertySources方法(方法回調)。雖然方法回調在成員變量的賦值之后,但由于是引用傳遞,所以通過成員屬性可以獲取到改變之后的值。
// 使用了模板方法設計模式。
// 給成員變量賦值,并調用子類重寫的方法,對propertySources進行操作。
protected AbstractEnvironment(MutablePropertySources propertySources) {
// 給全局變量 可變屬性源 賦值
this.propertySources = propertySources;
// 創建屬性解析器:PropertySourcesPropertyResolver 屬性源屬性解析器
this.propertyResolver = createPropertyResolver(propertySources);
// 自定義屬性源,此處回調子類重寫的方法。子類通過重寫該方法可以操作propertySources。spring標準環境StandardEnvironment重寫了該方法
customizePropertySources(propertySources);
}3、調用createPropertyResolver創建屬性解析器,用于解析屬性值中的占位符并進行替換。
// 在創建環境時,需要?jiǎng)?chuàng)建屬性解析器
protected ConfigurablePropertyResolver createPropertyResolver(MutablePropertySources propertySources) {
return new PropertySourcesPropertyResolver(propertySources);
}4、AbstractEnvironment的成員屬性
// 指示Spring忽略系統環境變量,默認值為"false"。 // false表示不會忽略系統環境變量,此時getSystemEnvironment方法會調用System.getenv()獲取環境屬性 // true表示會忽略系統的環境變量,此時getSystemEnvironment方法會返回一個空的Map public static final String IGNORE_GETENV_PROPERTY_NAME = "spring.getenv.ignore"; // 指定系統啟動時使用哪些配置文件,可以使用逗號隔開 public static final String ACTIVE_PROFILES_PROPERTY_NAME = "spring.profiles.active"; // 指定系統啟動時使用默認的配置文件,可以使用逗號隔開 public static final String DEFAULT_PROFILES_PROPERTY_NAME = "spring.profiles.default"; // 保留的默認的配置文件的名稱,如果沒有顯式設置默認配置文件名稱,也沒有顯式設置活動配置文件名稱,則默認情況下該配置文件將自動激活。 protected static final String RESERVED_DEFAULT_PROFILE_NAME = "default"; // 日志對象 protected final Log logger = LogFactory.getLog(getClass()); //系統啟動時使用的配置文件 private final Set<String> activeProfiles = new LinkedHashSet<>(); // 默認配置文件 private final Set<String> defaultProfiles = new LinkedHashSet<>(getReservedDefaultProfiles()); // 可變屬性源,使用該成員變量保存屬性源及通過該屬性源獲取的屬性 private final MutablePropertySources propertySources; // 可配置的屬性解析器 private final ConfigurablePropertyResolver propertyResolver;
到此這篇關于Spring運行環境Environment的解析的文章就介紹到這了,更多相關Spring Environment內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
- SpringBoot?Test的webEnvironment源碼解讀
- springboot的EnvironmentPostProcessor接口方法源碼解析
- Spring?Boot讀取配置文件內容的3種方式(@Value、Environment和@ConfigurationProperties)
- Spring之底層架構核心概念Environment及用法詳解
- SpringBoot擴展點EnvironmentPostProcessor實例詳解
- 詳解Spring中的Environment外部化配置管理
- 基于Spring Boot的Environment源碼理解實現分散配置詳解
- Spring之Environment類的使用方式
相關文章
Mapper層繼承BaseMapper<T>需要引入的pom依賴方式
這篇文章主要介紹了Mapper層繼承BaseMapper<T>需要引入的pom依賴方式,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2022-01-01
關于break和continue以及l(fā)abel的區別和作用(詳解)
下面小編就為大家?guī)硪黄P(guān)于break和continue以及l(fā)abel的區別和作用(詳解)。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-05-05
SpringBoot集成企業微信開發的實現
本文將詳細介紹如何使用?Spring?Boot?集成企業微信開發,通過企業微信?API?可以實現企業內部的一些自動化業務流程,提高工作效率,感興趣的可以了解一下2023-07-07
如何通過Java實現PDF轉高質量圖片
在Java中,將PDF文件轉換為高質量的圖片可以使用不同的庫,其中最常用的庫之一是?Apache?PDFBox,下面我們就來看看這個庫的具體使用吧2024-10-10
Java源碼解析HashMap的tableSizeFor函數
今天小編就為大家分享一篇關于Java源碼解析HashMap的tableSizeFor函數,小編覺得內容挺不錯的,現在分享給大家,具有很好的參考價值,需要的朋友一起跟隨小編來看看吧2019-01-01
如何保證RabbitMQ全鏈路數據100%不丟失問題
這篇文章主要介紹了如何保證RabbitMQ全鏈路數據100%不丟失問題,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2023-05-05
Spring實戰之使用ClassPathResource加載xml資源示例
這篇文章主要介紹了Spring實戰之使用ClassPathResource加載xml資源,結合實例形式分析了Spring使用ClassPathResource加載xml資源的具體實現步驟與相關操作技巧,需要的朋友可以參考下2019-12-12
Spring實戰之使用@POSTConstruct和@PreDestroy定制生命周期行為操作示例
這篇文章主要介紹了Spring實戰之使用@POSTConstruct和@PreDestroy定制生命周期行為操作,結合實例形式詳細分析了Spring使用@POSTConstruct和@PreDestroy定制生命周期相關接口定義、配置與功能實現技巧,需要的朋友可以參考下2019-12-12

