欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

Linux安裝Kubernetes(k8s)超詳細教程

 更新時間：2024年07月26日 08:31:05   作者：Meta39  
Kubernetes是一個輕便的和可擴展的開源平臺,用于管理容器化應用和服務,通過Kubernetes能夠進行應用的自動化部署和擴縮容,這篇文章主要給大家介紹了關于Linux安裝Kubernetes(k8s)的相關資料,需要的朋友可以參考下

系統初始化

生產環境肯定要更高配置，虛擬機以保守的最低配置。

機器ip規格
master192.168.203.111核2線程、2G內存、40G磁盤
node2192.168.203.121核2線程、2G內存、40G磁盤
node3192.168.203.131核2線程、2G內存、40G磁盤

修改為靜態ip

vi /etc/resolv.conf

追加內容后保存并退出

nameserver 223.5.5.5
nameserver 223.6.6.6

sudo vi /etc/sysconfig/network-scripts/ifcfg-ens33

BOOTPROTO="dhcp"改成BOOTPROTO=“static”，如果是復制的機器UUID、IPADDR也要不一致

TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="static"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
UUID="0ef41c81-2fa8-405d-9ab5-3ff34ac815cf"
DEVICE="ens33"
ONBOOT="yes"
IPADDR="192.168.203.11"
PREFIX="24"
GATEWAY="192.168.203.2"
IPV6_PRIVACY="no"

重啟網絡使配置生效

sudo systemctl restart network

永久關閉防火墻（所有機器）

sudo systemctl stop firewalld && systemctl disable firewalld

永久關閉selinux（所有機器）

sudo sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config

啟用selinux命令：setenforce 0【不需要執行，只是作為一種記錄】

永久禁止swap分區（所有機器）

sudo sed -ri 's/.*swap.*/#&/' /etc/fstab

永久設置hostname（根據機器分別設置mster、node1、node2）

三臺機器分別為mster、node1、node2

sudo hostnamectl set-hostname master

使用hostnamectl或hostname命令驗證是否修改成功

在hosts文件添加內容（僅master設置）

sudo cat >> /etc/hosts << EOF
192.168.203.11 master
192.168.203.12 node1
192.168.203.13 node2
EOF

將橋接的IPv4流量傳遞到iptables的鏈（所有機器）

sudo cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
vm.swappiness = 0
EOF

使k8s.conf立即生效

sudo sysctl --system

時間同步（所有機器）

sudo yum install -y ntpdate

安裝好后執行同步時間命令

sudo ntpdate time.windows.com

所有機器安裝Docker、Kubeadm、Kubelet、Kubectl

安裝Docker

安裝必要的一些系統工具

yum install -y net-tools
yum install -y wget
sudo yum install -y yum-utils device-mapper-persistent-data lvm2

安裝配置管理和設置鏡像源

sudo yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
sudo sed -i 's+download.docker.com+mirrors.aliyun.com/docker-ce+' /etc/yum.repos.d/docker-ce.repo

查找Docker-CE的版本

sudo yum list docker-ce.x86_64 --showduplicates | sort -r

安裝指定版本的docker-ce

sudo yum -y install docker-ce-[VERSION]

sudo yum -y install docker-ce-18.06.1.ce-3.el7

啟動docker服務

sudo systemctl enable docker && sudo systemctl start docker

查看docker是否啟動成功【注意docker的Client和Server要一致，否則某些情況下會報錯】

sudo docker --version

創建/etc/docker/daemon.json文件并設置docker倉庫為aliyun倉庫

sudo cat > /etc/docker/daemon.json << EOF
{
	"registry-mirrors":["https://b9pmyelo.mirror.aliyuncs.com"]
}
EOF

重啟docker查看配置是否生效

sudo docker info

重啟

sudo reboot now

添加yum軟件源kubernetes.repo為阿里云

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

安裝 kubelet、kubeadm、kubectl

sudo yum install -y kubelet-1.18.0 kubeadm-1.18.0 kubectl-1.18.0

設置開機啟動和啟動

sudo systemctl enable kubelet && systemctl start kubelet

部署Kubernetes

apiserver-advertise-address表示master主機ip
image-repository表示鏡像倉庫
kubernetes-version表示k8s的版本，跟上面的kubelet、kubeadm、kubectl版本一致
service-cidr表示集群內部虛擬網絡，Pod統一訪問入口
pod-network-cidr表示Pod網絡，與下面部署的CNI網絡組件yaml中保持一致

Kubernetes初始化【僅master執行，過程可能會有點久，請耐心等待命令行輸出】

–v=5可加可不加，建議加，輸出完整的日志，方便排查問題

kubeadm init \
--v=5 \
--apiserver-advertise-address=192.168.203.11 \
--image-repository=registry.aliyuncs.com/google_containers \
--kubernetes-version=v1.18.0 \
--service-cidr=10.96.0.0/12 \
--pod-network-cidr=10.244.0.0/16

輸出以下內容表示初始化成功

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.203.11:6443 --token 51c0rb.ehwwxemgec75r1g6 \
    --discovery-token-ca-cert-hash sha256:fad429370f462b36d2651e3e37be4d4b34e63d0378966a1532442dc3f67e41b4

根據上面的提示執行對應的To start using your cluster, you need to run the following as a regular user：命令

master節點執行，node節點不執行
kubectl get nodes查看節點信息

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
kubectl get nodes

node節點根據上面的提示執行對應的Then you can join any number of worker nodes by running the following on each as root：命令

node節點執行，master節點不執行

kubeadm join 192.168.203.11:6443 --token 51c0rb.ehwwxemgec75r1g6 \
    --discovery-token-ca-cert-hash sha256:fad429370f462b36d2651e3e37be4d4b34e63d0378966a1532442dc3f67e41b4

node1和node2執行命令

安裝cni

kube-flannel-ds-amd.yml文件

---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
    - configMap
    - secret
    - emptyDir
    - hostPath
  allowedHostPaths:
    - pathPrefix: "/etc/cni/net.d"
    - pathPrefix: "/etc/kube-flannel"
    - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: ['NET_ADMIN']
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unused in CaaSP
    rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
rules:
  - apiGroups: ['extensions']
    resources: ['podsecuritypolicies']
    verbs: ['use']
    resourceNames: ['psp.flannel.unprivileged']
  - apiGroups:
      - ""
    resources:
      - pods
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes/status
    verbs:
      - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-amd64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - amd64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.13.0-rc2
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.13.0-rc2
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - arm64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - arm
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-ppc64le
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - ppc64le
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-ppc64le
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-ppc64le
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-s390x
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - s390x
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-s390x
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay-mirror.qiniu.com/coreos/flannel:v0.11.0-s390x
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg

docker pull quay.io/coreos/flannel:v0.13.0-rc2
kubectl apply -f kube-flannel-ds-amd.yml

kubectl get pod -n kube-system 查看kube-flannel-ds-XXX 是否為runnin狀態

systemctl restart kubelet
kubectl get pod -n kube-system

master執行

kubectl get node

node1和node2節點處于Ready狀態

[root@master ~]# kubectl get node
NAME     STATUS   ROLES    AGE   VERSION
master   Ready    master   50m   v1.18.0
node1    Ready    <none>   49m   v1.18.0
node2    Ready    <none>   49m   v1.18.0

master部署CNI網絡插件【如果前面沒有把–network-plugin=cni移除并重啟kubelet，這步很可能會報錯】

kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
kubectl get pods -n kube-system
kubectl get node

master執行測試Kubernetes（k8s）集群

kubectl create deployment nginx --image=nginx
kubectl expose deployment nginx --port=80 --type=NodePort
kubectl get pod,svc

輸出如下

NAME                 TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)        AGE
service/kubernetes   ClusterIP   10.96.0.1      <none>        443/TCP        21m
service/nginx        NodePort    10.108.8.133   <none>        80:30008/TCP   111s

如果nginx啟動失敗，則進行刪除

kubectl delete service nginx

總結 

到此這篇關于Linux安裝Kubernetes(k8s)的文章就介紹到這了,更多相關Linux安裝k8s內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

相關文章

  • k8s編排之DaemonSet知識點詳解

    k8s編排之DaemonSet知識點詳解

    這篇文章主要為大家介紹了k8s編排之DaemonSet知識點詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪
    2023-01-01
  • 虛擬化和云計算的區別分析

    虛擬化和云計算的區別分析

    這篇文章主要介紹了虛擬化和云計算的區別,深入淺出的列舉分析了虛擬化與云計算的幾點常見區別,需要的朋友可以參考下
    2016-10-10
  • k8s部署Ingress并創建規則的詳細介紹

    k8s部署Ingress并創建規則的詳細介紹

    這篇文章主要介紹了k8s部署Ingress并創建規則,本文通過圖文實例相結合給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下
    2022-03-03
  • 詳解kubelet?創建pod流程代碼圖解及日志說明

    詳解kubelet?創建pod流程代碼圖解及日志說明

    這篇文章主要為大家介紹了詳解kubelet?創建pod流程代碼圖解及日志說明，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪
    2022-09-09
  • 如何使用Kubernetes自定義資源(CRD)詳解

    如何使用Kubernetes自定義資源(CRD)詳解

    自定義資源定義(CRD)是Kubernetes API擴展,可以定義新的對象類型,下面這篇文章主要給大家介紹了關于如何使用Kubernetes自定義資源(CRD)的相關資料,需要的朋友可以參考下
    2022-09-09
  • kubernetes日志備份解決ELK中日志丟失問題

    kubernetes日志備份解決ELK中日志丟失問題

    這篇文章主要為大家介紹了kubernetes日志備份方案的細節探究分析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪
    2023-10-10
  • DeepSeek-R1 云環境搭建部署流程

    DeepSeek-R1 云環境搭建部署流程

    本文主要介紹了DeepSeek-R1 云環境搭建部署流程,包括注冊、選擇合適的服務器配置、部署DeepSeek模型及通過UI界面和SSH連接進行操作,感興趣的可以了解一下
    2025-02-02
  • IPVS下CoreDNS滾動更新解析失敗原理探究

    IPVS下CoreDNS滾動更新解析失敗原理探究

    這篇文章主要為大家介紹了IPVS下CoreDNS滾動更新解析失敗原理探究，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪
    2023-03-03
  • Kubernetes調度管理優先級和搶占機制詳解

    Kubernetes調度管理優先級和搶占機制詳解

    這篇文章主要為大家介紹了Kubernetes調度管理優先級和搶占機制詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪
    2022-11-11
  • helmfile聲明式部署Helm?Chart使用詳解

    helmfile聲明式部署Helm?Chart使用詳解

    這篇文章主要為大家介紹了helmfile聲明式部署Helm?Chart使用詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪
    2023-02-02

最新評論