詳解python之簡單主機批量管理工具

更新時間：2017年01月27日 11:47:12 作者：前程明亮

這篇文章主要介紹了詳解python之簡單主機批量管理工具，具有一定的參考價值，有興趣的可以了解一下。

今天做了一個很簡單的小項目，感受到了paramiko模塊的強大，也深感自己Linux的功力不行~~

一、需求

二、簡單需求分析及流程圖

需求很少，我就簡單地說下:

1. 主機分組可以配置文件實現(我用字典存數據的).

2. 登陸功能不做。選擇分組后可查看組內對應主機的主機名和IP地址.

3. >>>cmd: df(輸入命令則起多個線程(視組內有多少個主機而定)同時執行)

輸出:

－－－－－－－－－－－－－h(huán)1－－－－－－－－－－－－

……(命令返回的數據)

－－－－－－－－－－－－－h(huán)2－－－－－－－－－－－－

……

>>>put test.yy(本地文件) filename (把本地的test.yy文件傳到遠程主機的/root目錄下)

4.可寫在配置文件中。包括遠程主機的: 主機名 IP 用戶名密碼端口

流程圖

三、目錄結構及源代碼

目錄結構:

from_windows.py(待上傳的文件)

main.py(批量主機管理接口)

 """批量主機管理接口"""
 
 import core
 
 if __name__ == "__main__":
   core.run()

core.py(核心代碼，被接口調用)

"""核心代碼"""
import settings
import paramiko
import threading
import os


class REMOTE_HOST(object):
  #遠程操作主機
  def __init__(self, host, port ,username, password, cmd):
    self.host = host
    self.port = port
    self.username = username
    self.password = password
    self.cmd = cmd

  def run(self):
    """起線程連接遠程主機后調用"""
    cmd_str = self.cmd.split()[0]
    if hasattr(self, cmd_str):   #反射 eg:調用put方法
      getattr(self, cmd_str)()
    else:
      #setattr(x,'y',v)is equivalent to  ``x.y=v''
      setattr(self, cmd_str, self.command)
      getattr(self, cmd_str)() #調用command方法，執行批量命令處理

  def command(self):
    """批量命令處理"""
    ssh = paramiko.SSHClient() #創建ssh對象
    #允許連接不在know_hosts文件中的主機
    ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
    ssh.connect(hostname=self.host,port=self.port,username=self.username,password=self.password)
    stdin,stdout,stderr = ssh.exec_command(self.cmd)
    result = stdout.read()
    print("%s".center(50, "-") % self.host)
    print(result.decode())
    ssh.close()

  def put(self):
    """上傳文件"""
    filename = self.cmd.split()[1] #要上傳的文件
    transport = paramiko.Transport((self.host, self.port))
    transport.connect(username=self.username, password=self.password)
    sftp = paramiko.SFTPClient.from_transport(transport)
    sftp.put(filename, filename)
    print("put sucesss")

    transport.close()


def show_host_list():
  """通過選擇分組顯示主機名與IP"""
  for index, key in enumerate(settings.msg_dic):
    print(index + 1, key, len(settings.msg_dic[key]))
  while True:
    choose_host_list = input(">>>(eg:group1)").strip()
    host_dic = settings.msg_dic.get(choose_host_list)
    if host_dic:
      #print(host_dic)
      for key in host_dic:
        print(key, host_dic[key]["IP"])
      return host_dic
    else:
      print("NO exit this group!")


def interactive(choose_host_list):
  """根據選擇的分組主機起多個線程進行批量交互"""
  thread_list = []
  while True:
    cmd = input(">>>").strip()
    if cmd:
      for key in choose_host_list:
        host, port, username, password = choose_host_list[key]["IP"], choose_host_list[key]["port"], \
                         choose_host_list[key]["username"], choose_host_list[key]["password"]
        func = REMOTE_HOST(host, port, username, password, cmd) # 實例化類
        t = threading.Thread(target=func.run) # 起線程
        t.start()
        thread_list.append(t)
      for t in thread_list:
        t.join() # 主線程等待子線程執行完畢
    else:
      continue


def run():
  choose_host_list = show_host_list()
  interactive(choose_host_list)

settings.py(配置文件)

"""配置文件"""

msg_dic = {
  "group1":{  #分組1
    "h1":{"IP":"192.168.1.1", "username":"11", "password":"aa", "port":22},
    "h2":{"IP":"192.168.1.2", "username":"22", "password":"bb", "port":22},
    "h3":{"IP":"192.168.1.3", "username":"33", "password":"cc", "port":22},
    "h4":{"IP":"192.168.1.4", "username":"44", "password":"dd", "port":22},
    "h5":{"IP":"192.168.1.5", "username":"55", "password":"ee", "port":22},
    "h6":{"IP":"192.168.1.6", "username":"66", "password":"ff", "port":22},
  },

  "group2":{  #分組2
    "h1":{"IP":"192.168.2.1", "username":"111", "password":"aaa", "port":22},
    "h2":{"IP":"192.168.2.2", "username":"222", "password":"bbb", "port":22},
    "h3":{"IP":"192.168.2.3", "username":"333", "password":"ccc", "port":22},
    "h4":{"IP":"192.168.2.4", "username":"444", "password":"ddd", "port":22},
    "h5":{"IP":"192.168.2.5", "username":"555", "password":"eee", "port":22},
    "h6":{"IP":"192.168.2.6", "username":"666", "password":"fff", "port":22},
    "h7":{"IP":"192.168.2.7", "username":"777", "password":"ggg", "port":22},
    "h8":{"IP":"192.168.2.8", "username":"888", "password":"hhh", "port":22},
  },

  "group3":{
    "h1":{"IP":"192.168.179.133", "username":"root", "password":"zcl", "port":22},
  }
}

測試:

硬件限制，我只用連接一臺虛擬機測試~

C:\Python34\python3.exe C:/Users/Administrator/PycharmProjects/laonanhai/host_manage/main.py
1 group1 6
2 group3 1
3 group2 8
>>>(eg:group1)group3
h1 192.168.179.133
>>>put from_windows.py
put sucesss
>>>
>>>ls
------------------------192.168.179.133------------------------
anaconda-ks.cfg
database_test
from_windows.py
install.log
install.log.syslog
m
oot
\root
tmp\from_windows.py

>>>

上傳前沒有from_windows.py文件，上傳后就有了!