Linux C線程池簡單實現實例
更新時間:2017年07月05日 09:46:34 投稿:lqh
這篇文章主要介紹了Linux C線程池簡單實現實例的相關資料,需要的朋友可以參考下
Linux C線程池
三個文件
1 tpool.h
typedef struct tpool_work {
void (*routine)(void *);
void *arg;
struct tpool_work *next;
} tpool_work_t;
typedef struct tpool {
/* pool characteristics */
int num_threads;
int max_queue_size;
/* pool state */
pthread_t *tpid;
tpool_work_t *queue;
int front, rear;
/* 剩下的任務可以做完, 但不能再加新的任務 */
int queue_closed;
/* 剩下的任務都不做了, 直接關閉 */
int shutdown;
/* pool synchronization */
pthread_mutex_t queue_lock;
pthread_cond_t queue_has_task;
pthread_cond_t queue_has_space;
pthread_cond_t queue_empty;
} *tpool_t;
void tpool_init(tpool_t *tpoolp,int num_threads, int max_queue_size);
int tpool_add_work(tpool_t tpool,void(*routine)(void *), void *arg);
int tpool_destroy(tpool_t tpool,int finish);
2 tpool.c
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <string.h>
#include <pthread.h>
#include "tpool.h"
#define DEBUG
#if defined(DEBUG)
#define debug(...) do { \
flockfile(stdout); \
printf("###%p.%s: ", (void *)pthread_self(), __func__); \
printf(__VA_ARGS__); \
putchar('\n'); \
fflush(stdout); \
funlockfile(stdout); \
} while (0)
#else
#define debug(...)
#endif
void *tpool_thread(void *);
void tpool_init(tpool_t *tpoolp, int num_worker_threads, int max_queue_size)
{
int i;
tpool_t pool;
pool = (tpool_t)malloc(sizeof(struct tpool));
if (pool == NULL) {
perror("malloc");
exit(0);
}
pool->num_threads = 0;
pool->max_queue_size = max_queue_size + 1;
pool->num_threads = num_worker_threads;
pool->tpid = NULL;
pool->front = 0;
pool->rear = 0;
pool->queue_closed = 0;
pool->shutdown = 0;
if (pthread_mutex_init(&pool->queue_lock, NULL) == -1) {
perror("pthread_mutex_init");
free(pool);
exit(0);
}
if (pthread_cond_init(&pool->queue_has_space, NULL) == -1) {
perror("pthread_mutex_init");
free(pool);
exit(0);
}
if (pthread_cond_init(&pool->queue_has_task, NULL) == -1) {
perror("pthread_mutex_init");
free(pool);
exit(0);
}
if (pthread_cond_init(&pool->queue_empty, NULL) == -1) {
perror("pthread_mutex_init");
free(pool);
exit(0);
}
if ((pool->queue = malloc(sizeof(struct tpool_work) *
pool->max_queue_size)) == NULL) {
perror("malloc");
free(pool);
exit(0);
}
if ((pool->tpid = malloc(sizeof(pthread_t) * num_worker_threads)) == NULL) {
perror("malloc");
free(pool);
free(pool->queue);
exit(0);
}
for (i = 0; i < num_worker_threads; i++) {
if (pthread_create(&pool->tpid[i], NULL, tpool_thread,
(void *)pool) != 0) {
perror("pthread_create");
exit(0);
}
}
*tpoolp = pool;
}
int empty(tpool_t pool)
{
return pool->front == pool->rear;
}
int full(tpool_t pool)
{
return ((pool->rear + 1) % pool->max_queue_size == pool->front);
}
int size(tpool_t pool)
{
return (pool->rear + pool->max_queue_size -
pool->front) % pool->max_queue_size;
}
int tpool_add_work(tpool_t tpool, void(*routine)(void *), void *arg)
{
tpool_work_t *temp;
pthread_mutex_lock(&tpool->queue_lock);
while (full(tpool) && !tpool->shutdown && !tpool->queue_closed) {
pthread_cond_wait(&tpool->queue_has_space, &tpool->queue_lock);
}
if (tpool->shutdown || tpool->queue_closed) {
pthread_mutex_unlock(&tpool->queue_lock);
return -1;
}
int is_empty = empty(tpool);
temp = tpool->queue + tpool->rear;
temp->routine = routine;
temp->arg = arg;
tpool->rear = (tpool->rear + 1) % tpool->max_queue_size;
if (is_empty) {
debug("signal has task");
pthread_cond_broadcast(&tpool->queue_has_task);
}
pthread_mutex_unlock(&tpool->queue_lock);
return 0;
}
void *tpool_thread(void *arg)
{
tpool_t pool = (tpool_t)(arg);
tpool_work_t *work;
for (;;) {
pthread_mutex_lock(&pool->queue_lock);
while (empty(pool) && !pool->shutdown) {
debug("I'm sleep");
pthread_cond_wait(&pool->queue_has_task, &pool->queue_lock);
}
debug("I'm awake");
if (pool->shutdown == 1) {
debug("exit");
pthread_mutex_unlock(&pool->queue_lock);
pthread_exit(NULL);
}
int is_full = full(pool);
work = pool->queue + pool->front;
pool->front = (pool->front + 1) % pool->max_queue_size;
if (is_full) {
pthread_cond_broadcast(&pool->queue_has_space);
}
if (empty(pool)) {
pthread_cond_signal(&pool->queue_empty);
}
pthread_mutex_unlock(&pool->queue_lock);
(*(work->routine))(work->arg);
}
}
int tpool_destroy(tpool_t tpool, int finish)
{
int i;
pthread_mutex_lock(&tpool->queue_lock);
tpool->queue_closed = 1;
if (finish == 1) {
debug("wait all work done");
while (!empty(tpool)) {
pthread_cond_wait(&tpool->queue_empty, &tpool->queue_lock);
}
}
tpool->shutdown = 1;
pthread_mutex_unlock(&tpool->queue_lock);
pthread_cond_broadcast(&tpool->queue_has_task);
debug("wait worker thread exit");
for (i = 0; i < tpool->num_threads; i++) {
pthread_join(tpool->tpid[i], NULL);
}
debug("free thread pool");
free(tpool->tpid);
free(tpool->queue);
free(tpool);
}
3 tpooltest.c
#include <stdio.h>
#include <pthread.h>
#include "tpool.h"
char *str[]={"string 0", "string 1", "string 2",
"string 3", "string 4", "string 5"};
void job(void * jobstr)
{
long i, x;
for (i = 0; i < 100000000; i++) {
x = x +i;
}
printf("%s\n", (char *)jobstr);
}
int main(void)
{
int i;
tpool_t test_pool;
tpool_init(&test_pool, 8, 20);
for ( i = 0; i < 5; i++) {
tpool_add_work(test_pool, job, str[i]);
}
tpool_destroy(test_pool, 1);
return 0;
}
感謝閱讀,希望能幫助到大家,謝謝大家對本站的支持!
相關文章
Linux 下sudo網絡權限詳解
這篇文章主要介紹了Linux 下sudo網絡權限詳解的相關資料,需要的朋友可以參考下2017-05-05
Shell命令行中特殊字符與其轉義詳解(去除特殊含義)
這篇文章主要給大家詳細介紹了Shell命令行中特殊字符與其轉義(去除特殊含義)的相關資料,文中介紹的很詳細,相信對大家具有一定的參考價值,有需要的朋友們下面來一起看吧。2017-02-02
Linux命令學習之原來最簡單的ls命令這么復雜
ls命令應該是我們最常用的命令之一了,但是我們可能容易忽略那些看起來最簡單的東西。本文就來和大家詳細聊聊ls命令的使用,需要的可以了解一下2022-10-10
shell實現FizzBuzzWhizz問題示例(拉勾網面試題)
這篇文章主要介紹了shell實現FizzBuzzWhizz問題示例(拉勾網面試題),需要的朋友可以參考下2014-05-05
用Shell判斷字符串包含關系的方法小結
這篇文章主要給大家介紹了關于用Shell判斷字符串包含關系的幾種方法,其中包括利用grep查找、利用字符串運算符、利用通配符、利用case in 語句以及利用替換等方法,每個方法都給出了詳細的示例代碼與介紹,有需要的朋友們可以參考參考借鑒,下面來一起看看吧。2016-12-12
windows下上傳shell腳本不能運行的解決方法
windows下上傳shell腳本不能運行—將dos模式修改為unix 文件格式 就可以順利解決,下文給大家?guī)砹嗽敿?xì)解決方法,一起看看吧2018-06-06

