VBS基礎篇 - vbscript常用函數及功能
vbs常用函數
函數名 | 語法 | 功能 |
Abs | Abs(number) | 返回一個數的絕對值 |
Sqr | Sqr(number) | 返回一個數的平方根 |
Sin | Sin(number) | 返回角度的正玄值 |
Cos | Cos(number) | 返回角度的余玄值 |
Tan | Tan(number) | 返回角度的正切值 |
Atn | Atn(number) | 返回角度的反正切值 |
Log | Log(number) | 返回一個數的自然對數 |
Int | Int(number) | 取整函數,返回一個小于number的第一整數 |
FormatNumber | FormatNumber(number, numdigitsafterdecimal) | 轉化為指定小數位數(numdigitsafterdecimal)的數字 |
Rnd | Rnd() | 返回一個從0到1的隨機數 |
Ubound | Ubound(數組名,維數) | 返回該數組的最大下標 |
Lbound | Lbound(數組名,維數) | 返回最小下標數 |
注釋:
Rnd 函數
語法:Rnd[(number)]
返回一隨機數。參數 number 可以是任何的數值表達式。
注解:
Rnd 函數返回的隨機數介于 0 和 1 之間,可等于 0,但不等于 1。
number 的值會影響 Rnd 返回的隨機數:
Number的取值 | 返回值 |
小于0 | 每次都是使用numbe當做隨機結果。 |
大于0 | 隨機序列中的下一個隨機數。 |
等于0 | 最近一次產生過的隨機數。 |
省略 | 隨機序列中的下一個隨機數。 |
各種轉換函數及功能
函數 | 功能 |
CStr(variant) | 將變量variant轉化為字符串類型 |
CDate(variant) | 將變量variant轉化為日期類型 |
CInt(variant) | 將變量variant轉化為整數類型 |
CLng(variant) | 將變量variant轉化為長整數類型 |
CSng(variant) | 將變量variant轉化為single類型 |
CDbl(variant) | 將變量variant轉化為double類型 |
CBool(variant) | 將變量variant轉化為布爾類型 |
注釋:
1整型
以Integer 表示整型,其范圍為 -32,768 到 32,767 之間。
2、長整型
Long(長整型) ,其范圍從 -2,147,483,648 到 2,147,483,647。
3、單精度型(Single)
Single(單精度浮點型),它的范圍在負數的時候是從 -3.402823E38 到 -1.401298E-45,而在正數的時候是從 1.401298E-45 到 3.402823E38。
4、雙精度型(Double)
Double(雙精度浮點型)它的范圍在負數的時候是從 -1.79769313486232E308 到 -4.94065645841247E-324,而正數的時候是從 4.94065645841247E-324 到 1.79769313486232E308。
常用的字符串函數及功能
函數 | 語法 | 功能 |
Len | Len(string) | 返回string字符串里的字符數目 |
Trim | Trim(string) | 將字符串前后的空格去掉 |
Ltrim | Ltrim(string) | 將字符串前面的空格去掉 |
Rtrim | Rtrim(string) | 將字符串后面的空格去掉 |
Mid | Mid(string,start,length) | 從string字符串的start字符開始取得length長度的字符串,如果省略第三個參數表示從start字符開始到字符串結尾的字符串 |
Left | Left(string,length) | 從string字符串的左邊取length長度的字符串 |
Right | Right(string,length) | 從srting字符串的右邊取得length長度的字符串 |
LCase | LCase(string) | 將字符串里的所有大寫字母轉化成小寫字母 |
UCase | UCase(string) | 將字符串里的小寫字母轉化成大寫字母 |
StrComp | Strcomp(string1,string1) | 返回string1字符串與string2字符串的比較結果,如果兩個字符串相同,返回0 |
InStr | InStr(string1,string2) | 返回string2字符串在string1字符串中第一次出現的位置 |
Split | Split(string1,delimiter | 將字符串根據delimiter拆分成一維數組,其中delimiter用于表示子字符串界限的字符,如果省略,使用空格(“”)當作分隔符 |
Replace | Replace(string1,find,replacewith) | 返回字符串,其中指定的子字符串(find)被替換為另一個子字符串(replacewith) |
常用的字符串函數及功能
函數 | 語法 | 功能 |
Len | Len(string) | 返回string字符串里的字符數目 |
Trim | Trim(string) | 將字符串前后的空格去掉 |
Ltrim | Ltrim(string) | 將字符串前面的空格去掉 |
Rtrim | Rtrim(string) | 將字符串后面的空格去掉 |
Mid | Mid(string,start,length) | 從string字符串的start字符開始取得length長度的字符串,如果省略第三個參數表示從start字符開始到字符串結尾的字符串 |
Left | Left(string,length) | 從string字符串的左邊取length長度的字符串 |
Right | Right(string,length) | 從srting字符串的右邊取得length長度的字符串 |
LCase | LCase(string) | 將字符串里的所有大寫字母轉化成小寫字母 |
UCase | UCase(string) | 將字符串里的小寫字母轉化成大寫字母 |
StrComp | Strcomp(string1,string1) | 返回string1字符串與string2字符串的比較結果,如果兩個字符串相同,返回0 |
InStr | InStr(string1,string2) | 返回string2字符串在string1字符串中第一次出現的位置 |
Split | Split(string1,delimiter | 將字符串根據delimiter拆分成一維數組,其中delimiter用于表示子字符串界限的字符,如果省略,使用空格(“”)當作分隔符 |
Replace | Replace(string1,find,replacewith) | 返回字符串,其中指定的子字符串(find)被替換為另一個子字符串(replacewith) |
常用日期和時間函數及說明
函數 | 語法 | 功能 |
Now | Now() | 取得系統當前的日期和時間 |
Date | Date() | 取得系統當前的日期 |
Time | Time() | 取得系統當前的時間 |
Year | Year() | 取得給定日期的年份 |
Month | Month(Date) | 取得給定日期的月份 |
Day | Day(Date) | 取得給定日期是幾號 |
Hour | Hour(time) | 取得給定時間是第幾小時 |
Minute | Minute(time) | 取得給定時間是第幾分鐘 |
Second | Second(time) | 取得給定時間是第幾秒 |
WeekDay | WeekDay(Date) | 取得給定日期是星期幾的整數 1 表示星期一 2 表示星期二 依次類推 |
DateDiff | DateDiff(“Var”, Var1,Var2) Var:日期或時間間隔因子 Var1:第一個日期或時間 Var2:第二個日期或時間 |
計算兩個日期或時間的間隔 |
DateAdd | DateAdd(“Var”, Var1,Var2) Var:日期或時間間隔因子 Var1:日期或時間 Var2:日期或時間 |
對兩個日期或時間作加法 DateAdd(“d”,10,Date()) 10天后是幾號 |
FormatDateTime | FortDateTime(Date,vbShortDate) | 轉化為短日期格式 |
FortDateTime(Date,vblongDate) | 轉化為長日期格式 | |
FortDateTime(Date,vbShortTime) | 轉化為短時間格式 | |
FortDateTime(Date,vbLongTime) | 轉化為長時間格式 |
日期或時間間隔因子
間隔因子 | yyyy | m | d | ww | h | s |
說明 | 年 | 月 | 日 | 星期 | 小時 | 秒 |
常用的檢驗函數及功能
函數 | 功能 |
VarType(variant) | 檢查變量vriant的值,函數值為該變量的數據子類型,0表示空,2表示整數,7表示日子,8表示字符串,11表示布爾變量,8192表示數組 |
IsNumeric(variant) | 檢查變量variant的值,如果variant是數值類型,則函數值為ture |
IsNull(variant) | 檢查變量variant的值,如果variant為null,則函數值為ture |
IsEmpty(variant) | 檢查變量的值,如果variant是empty,則函數值為ture |
IsObject(variant) | 檢查變量variant的值,如果variant是對象類型,則函數值為ture |
IsDate(variant) | 檢查變量variant的值,如果variant是日期類型,則函數值為ture |
IsArray(variant) | 檢查變量variant的值,如果variant是數組類型,則函數值為ture |
下面給大家一個常見實例,大家可以運行測試
Option Explicit '*********************************Date/Time函數******************************* 'CDate函數把一個合法的日期和事件表達式轉換為Date類型,并返回結果 Dim d1 Dim d2 Dim d3 d1="April 22,2001" If IsDate(d1) Then MsgBox CDate(d1) End If d2=#2/22/01# If IsDate(d2) Then MsgBox CDate(d2) End If d3="3:18:40 AM" If IsDate(d3) Then MsgBox CDate(d3) End If 'Date函數返回當前系統的日期 '日期 MsgBox Date '日期+時間 MsgBox Now '時間 MsgBox Time 'DateAdd函數可返回已添加指定時間間隔的日期 MsgBox DateAdd("yyyy",1,"31-Jan-2003")'加一年 MsgBox DateAdd("yyyy",1,"31-Jan-2003")'減一年 MsgBox DateAdd("q",1,"31-Jan-2003")'加一個季度 MsgBox DateAdd("m",1,"31-Jan-2003")'加一個月 MsgBox DateAdd("y",1,"31-Jan-2003")'當年的第幾天 MsgBox DateAdd("d",1,"31-Jan-2003")'增加一天 MsgBox DateAdd("w",1,"31-Jan-2003")'當周的第幾天 MsgBox DateAdd("ww",1,"31-Jan-2003")'增加一個周 MsgBox DateAdd("h",1,"31-Jan-2003")'某日期的第一個小時 MsgBox DateAdd("n",1,"31-Jan-2003")'某日期的第一分鐘 MsgBox DateAdd("s",1,"31-Jan-2003")'某日期的第一秒 'DateDiff函數可返回兩個日期之間的時間間隔數 MsgBox DateDiff("yyyy",Date,"31-Jan-2012") MsgBox DateDiff("q",Date,"31-Jan-2012") MsgBox DateDiff("m",Date,"31-Jan-2012") MsgBox DateDiff("y",Date,"31-Jan-2012") MsgBox DateDiff("d",Date,"31-Jan-2012") MsgBox DateDiff("w",Date,"31-Jan-2012") MsgBox DateDiff("ww",Date,"31-Jan-2012") MsgBox DateDiff("h",Date,"31-Jan-2012") MsgBox DateDiff("n",Date,"31-Jan-2012") MsgBox DateDiff("s",Date,"31-Jan-2012") 'DatePart函數可返回給定日期的指定部分 Dim d d="2/10/2012 16:25:56" MsgBox DatePart("yyyy",d) MsgBox DatePart("m",d) MsgBox DatePart("q",d) MsgBox DatePart("w",d) MsgBox DatePart("ww",d) MsgBox DatePart("y",d) MsgBox DatePart("s",d) MsgBox DatePart("h",d) MsgBox DatePart("n",d) MsgBox DatePart("d",d) 'DateSerial函數可返回指定的年、月、日的子類型Date的Variant MsgBox DateSerial(2012,2,30) 'DateValue函數返回一個日期類型 MsgBox DateValue("31-Jan-2012 2:39:49 AM") 'Day函數可返回介于1到31之間的一個代表月的天數的數字 MsgBox Day(Date) 'FormatDateTime函數可格式化并返回一個額合法的日期或時間表達式 MsgBox FormatDateTime(Now,0) MsgBox FormatDateTime(Now,1) MsgBox FormatDateTime(Now,2) MsgBox FormatDateTime(Now,3) MsgBox FormatDateTime(Now,4) 'Hour函數可返回介于0到23之間的代表天的小時數的數字 MsgBox Hour(Now) 'IsDate函數可返回一個布爾值,指示經計算的表達式是否可被轉換為日期,如果表達式是日期或可被轉換為日期,則返回True,否則,返回False。 MsgBox IsDate("15-3-2012") 'Minute函數可返回表示小時的分鐘數的數字 MsgBox Minute(Now) 'Month函數可返回表示年的月份的數字 MsgBox Month(Now) 'Second函數可返回表示分鐘的秒數的數字 MsgBox Second(Now) 'Time函數可返回當前的系統時間 MsgBox Time 'Timer函數可返回午夜12時以后已經過去的秒數 MsgBox Timer 'TimeSerial函數可把時、分、秒合并成為時間 MsgBox TimeSerial(3,45,50) 'TimeValue函數可返回包含時間的日期子類型的變量 MsgBox TimeValue(Now) 'Weekday函數可返回表示一周的天數的數字,介于1和7之間。 MsgBox Weekday(Date,0) 'WeekdayName函數可返回一周中指定一天的星期名 MsgBox WeekdayName(3) MsgBox WeekdayName(Weekday(Date,1)) 'Year函數可返回表示年份的一個數字 MsgBox Year(date) '*********************************Conversion函數******************************* 'Asc函數可把字符串中的第一個字母轉換為對應的ANSI代碼,并返回結果 MsgBox Asc("A") MsgBox Asc("a") 'CBool函數可把表達式轉換為布爾類型 Dim a a=5 MsgBox CBool(a) 'CByte函數可把表達式轉換為字節類型 Dim b b=134.12345 MsgBox CByte(b) 'CCur函數可把表達式轉換為貨幣類型 Dim c c=12345.12345656 MsgBox CCur(c) 'CDbl函數可把表達式轉換為雙精度類型 Dim e e=123.12454656577435235436 MsgBox CDbl(e) 'Chr函數可把指定的ANSI字符代碼轉換為字符 MsgBox Chr(65) 'CInt函數可把表達式轉換為整數類型 MsgBox CInt(12.3435) 'CLng函數可把表達式轉換為長整形類型 MsgBox CLng(12.676) MsgBox CLng(12.243) 'CSng函數可把表達式轉換為單精度類型 MsgBox CSng(122.355465) MsgBox CSng(21.23222) 'CStr函數可把表達式轉換為字符串類型 MsgBox CStr(false) MsgBox CStr(Date) MsgBox CStr(Empty) MsgBox CStr(Error) '*********************************Format函數******************************* 'FormatCurrency函數可返回作為貨幣值被格式化的表達式,使用系統控制面板中定義的貨幣符號 MsgBox FormatCurrency(21.23456) 'FormatNumber函數可返回作為數字被格式化的表達式 MsgBox FormatNumber(12.23456775,3) 'FormatPercent函數可返回作為百分?jǐn)?shù)被格式化的表達式 MsgBox FormatPercent(3/7,3) '*********************************Math函數******************************* 'Abs函數可返回指定的數字的絕對值 MsgBox Abs(-9) 'Atn函數可返回指定數字的正切 MsgBox Atn(9) 'Cos函數可返回指定數字的余弦 MsgBox Cos(9) 'Exp函數可e的冪次方 MsgBox Exp(2.3) 'Fix函數可返回指定數字的整數部分 MsgBox Fix(-6.325) MsgBox Int(-6.325) 'Log函數可返回指定數據的自然對數 MsgBox Log(10) 'Rnd函數可返回一個隨機數,數字總是小于1但大于或等于0. MsgBox Rnd 'Sgn函數可返回指定數字的符號的整數 MsgBox Sgn(15) MsgBox Sgn(-5) MsgBox Sgn(0) 'Sin函數可返回指定數字的正弦 MsgBox Sin(9) 'Sqr函數可返回一個數的平方根 MsgBox Sqr(9) 'Tan函數可返回指定數字的正切 MsgBox Tan(9) '*********************************Array函數******************************* 'Array可返回一個包含數組的變量 Dim Arr Arr=Array(1,2,3,4,5) MsgBox Arr(0) 'Filter函數可返回一個基于0的數組,此數組包含以特定過濾條件為基礎的字符串?dāng)?shù)組的子集 Dim Arr1(5),b Arr1(0)="Saturday" Arr1(1)="Sunday" Arr1(2)="Monday" Arr1(3)="Tuesday" Arr1(4)="Wednesday" b=Filter(Arr1,"n",True) MsgBox b(0) MsgBox b(1) MsgBox b(2) 'ISArray函數可返回一個指示指定的變量是否為數組的布爾值。如果變量為數組,則返回True,否則返回False。 Dim a(3) a(0)=1 a(1)=2 a(2)=3 MsgBox IsArray(a) 'Join函數可返回一個由某個數組中一系列子字符串組成的字符串 Dim a(5),b a(0)="Saturday" a(1)="Sunday" a(2)="Monday" a(3)="Wendesday" a(4)="Tuesday" b=Filter(a,"n",True) MsgBox Join(b,",") 'LBound函數可返回指示數組維數的最小下標。(始終為0) 'UBound函數可返回指示數組維數的最大下標。 Dim a(5) MsgBox LBound(a) MsgBox UBound(a) 'Split函數可返回基于0的一維數組,此數組包含指定的子字符串 Dim txt,a txt="hello/world!" a=Split(txt,"/") MsgBox a(0) MsgBox a(1) '*********************************String函數******************************* 'InStr函數可返回一個字符串在另一個字符串中首次出現的位置 Dim txt,pos txt="This is a beautiful day!" pos=InStr(4,txt,"is",1) MsgBox pos 'InStrRev函數可返回一個字符串在另一個字符串中首次出現的位置,搜索從字符串的末端開始,但是返回的位置是從字符串的起點開始計數的。 Dim txt,pos txt="This is a beautiful day!" pos=InStrRev(txt,"i",-1,1) MsgBox pos 'LCase函數可把指定的字符串轉換為小寫 'UCase函數可把指定的字符串轉換為大寫 Dim txt,pos1,pos2 txt="This Is A Beautiful Day!" pos1=LCase(txt) pos2=UCase(txt) MsgBox pos1 MsgBox pos2 'Left函數可從字符串的左側返回指定數目的字符 'Right函數可從字符串的右側返回指定數目的字符 Dim txt,pos1,pos2 txt="This is a beautiful day!" pos1=Left(txt,5) pos2=Right(txt,6) MsgBox pos1 MsgBox pos2 'Len函數可返回字符串中字符的數目 Dim txt,pos txt="This is a beautiful day!" pos=Len(txt) MsgBox pos 'LTrim函數可刪除字符串左側的空格 'RTrim函數可刪除字符串右側的空格 'Trim函數可刪除字符串兩端的空格 Dim txt,pos1,pos2,pos3 txt=" This is a beautiful day! " pos1=LTrim(txt) pos2=RTrim(txt) pos3=Trim(txt) MsgBox pos1 MsgBox pos2 MsgBox pos3 MsgBox Len(pos1) MsgBox Len(pos2) MsgBox Len(pos3) 'Mid函數可從字符串中返回指定數目的字符 Dim txt txt="This is a beautiful day!" MsgBox Mid(txt,1,5) MsgBox Mid(txt,2,5) MsgBox Mid(txt,1) MsgBox Mid(txt,5) 'Replace函數可使用一個字符串替換另一個字符串指定的次數 Dim txt txt="This is a beautiful day!" MsgBox Replace(txt,"is","AA",4,2) 'Space函數可返回一個由指定數目的空格組成的字符串 Dim txt txt=Space(20) MsgBox txt MsgBox Len(txt) 'StrComp函數可比較兩個字符串,并返回表示比較結果的一個值 Dim txt1,txt2 txt1="hello" txt2="hell" MsgBox StrComp(txt1,txt2) 'String函數可返回包含指定長度的重復字符的一個字符串 MsgBox String(10,"*") 'StrReverse函數可反轉一個字符串 Dim txt txt="This is a beautiful day!" MsgBox StrReverse(txt) '*********************************其他函數******************************* 'InputBox函數可顯示一個對話框,用戶可在其中輸入文本或點擊一個按鈕。 Dim fname fname=InputBox("Enter your name:") MsgBox ("Your name is "&fname) 'IsEmpty函數可返回指定的變量是否被初始化的布爾值。 Dim x,y y=10 MsgBox IsEmpty(x) MsgBox IsEmpty(y) 'IsNull函數可返回指定表達式是否無效數據的布爾值 Dim x,y,z x=Null y=10 z="" MsgBox IsNull(x) MsgBox IsNull(y) MsgBox IsNull(z) 'IsNumeric函數可返回指示指定的表達式是否可作為數字來計算的布爾值。 Dim x x=10 MsgBox IsNumeric(x) x=Empty MsgBox IsNumeric(x) x="1 h" MsgBox IsNumeric(x)
這篇關于vbscript常見函數的文章就介紹到這里,希望大家以后多多支持腳本之家。
相關文章
VBS和頁面中響應COM的事件的方法和代碼
VBS和頁面中響應COM的事件的方法和代碼...2007-03-03可以定時自動關機的vbs腳本
可以定時自動關機的vbs腳本...2007-02-02VBS 自動登錄論壇的實現代碼
這篇文章主要介紹了如果通過vbs實現論壇自動登錄的實現方法,其實主要利用了vbs操作網頁表單的自動填寫實現,喜歡的朋友可以試試2013-07-07將WMI中的DateTime類型轉換成VBS時間的函數代碼
WMI中的DateTime數據類型保存的時間格式是UTC,與VBS中的時間類型不同。2011-02-02利用VBS發送短信的實現代碼(通過飛信)
無意中看到百度 VBS 貼吧里一個標題為《無私的奉獻出我的用飛信免費發短信接口》的帖子。2011-08-08用vbs實現虛擬主機和域名查循的腳本
用vbs實現的可以查詢虛擬主機和域名信息的腳本代碼,保存為vbs運行即可2008-06-06