Python3+OpenCV實現簡單交通標志識別流程分析

更新時間：2021年12月23日 08:53:08 作者：CCxiao5

這篇文章主要介紹了Python3+OpenCV實現簡單交通標志識別,主要思路是解析XML文檔，根據<name>標簽進行分類，如果是直行、右轉、左轉、停止就把它從原圖中裁剪下來并重命名，感謝的朋友跟隨小編一起看看示例代碼

我的數據目錄樹。其中test_images/train_images是收集得到原始數據集。realTest/realTrain是預處理后的圖像。dataTest/dataTrain是經過分類處理得到的圖像，HogTest/HogTrain是通過XML標注后裁剪得到的圖像。HogTest_affine/HogTrain_affine是經過仿射變換處理擴充的訓練集和測試集。imgTest_hog.txt/imgTrain_hog.txt是測試集和訓練集的Hog特征

一、圖像處理

　　由于得到的數據集圖像大小不一（如下），我們首先從中心區域裁剪并調整正方形圖像的大小，然后將處理后的圖像保存到realTrain和realTest里面。

圖片名稱對應關系如下：

img_label = {
"000":"Speed_limit_5",
"001":"Speed_limit_15",
"002":"Speed_limit_30",
"003":"Speed_limit_40",
"004":"Speed_limit_50",
"005":"Speed_limit_60",
"006":"Speed_limit_70",
"007":"Speed_limit_80",
"008":"No straight or right turn",
"009":"No straight or left turn",
"010":"No straight",
"011":"No left turn",
"012":"Do not turn left and right",
"013":"No right turn",
"014":"No Overhead",
"015":"No U-turn",
"016":"No Motor vehicle",
"017":"No whistle",
"018":"Unrestricted speed_40",
"019":"Unrestricted speed_50",
"020":"Straight or turn right",
"021":"Straight",
"022":"Turn left",
"023":"Turn left or turn right",
"024":"Turn right",
"025":"Drive on the left side of the road",
"026":"Drive on the right side of the road",
"027":"Driving around the island",
"028":"Motor vehicle driving",
"029":"Whistle",
"030":"Non-motorized",
"031":"U-turn",
"032":"Left-right detour",
"033":"traffic light",
"034":"Drive cautiously",
"035":"Caution Pedestrians",
"036":"Attention non-motor vehicle",
"037":"Mind the children",
"038":"Sharp turn to the right",
"039":"Sharp turn to the left",
"040":"Downhill steep slope",
"041":"Uphill steep slope",
"042":"Go slow",
"044":"Right T-shaped cross",
"043":"Left T-shaped cross",
"045":"village",
"046":"Reverse detour",
"047":"Railway crossing-1",
"048":"construction",
"049":"Continuous detour",
"050":"Railway crossing-2",
"051":"Accident-prone road section",
"052":"stop",
"053":"No passing",
"054":"No Parking",
"055":"No entry",
"056":"Deceleration and concession",
"057":"Stop For Check"
}

def center_crop(img_array, crop_size=-1, resize=-1, write_path=None):
    ##從中心區域裁剪并調整正方形圖像的大小。
    rows = img_array.shape[0]
    cols = img_array.shape[1]

    if crop_size==-1 or crop_size>max(rows,cols):
        crop_size = min(rows, cols)
    row_s = max(int((rows-crop_size)/2), 0)
    row_e = min(row_s+crop_size, rows) 
    col_s = max(int((cols-crop_size)/2), 0)
    col_e = min(col_s+crop_size, cols)

    img_crop = img_array[row_s:row_e,col_s:col_e,]

    if resize>0:
        img_crop = cv2.resize(img_crop, (resize, resize))

    if write_path is not None:
        cv2.imwrite(write_path, img_crop)
    return img_crop

　　然后根據得到的realTrain和realTest自動生成帶有<size><width><height><depth><filename>的xml文件

def write_img_to_xml(imgfile, xmlfile):
    
    img = cv2.imread(imgfile)
    img_folder, img_name = os.path.split(imgfile)
    img_height, img_width, img_depth = img.shape
    doc = Document()

    annotation = doc.createElement("annotation")
    doc.appendChild(annotation)

    folder = doc.createElement("folder")
    folder.appendChild(doc.createTextNode(img_folder))
    annotation.appendChild(folder)

    filename = doc.createElement("filename")
    filename.appendChild(doc.createTextNode(img_name))
    annotation.appendChild(filename)

    size = doc.createElement("size")
    annotation.appendChild(size)

    width = doc.createElement("width")
    width.appendChild(doc.createTextNode(str(img_width)))
    size.appendChild(width)

    height = doc.createElement("height")
    height.appendChild(doc.createTextNode(str(img_height)))
    size.appendChild(height)

    depth = doc.createElement("depth")
    depth.appendChild(doc.createTextNode(str(img_depth)))
    size.appendChild(depth)

    with open(xmlfile, "w") as f:
        doc.writexml(f, indent="\t", addindent="\t", newl="\n", encoding="utf-8")

<annotation>
<folder>/home/xiao5/Desktop/Test2/data/realTest/PNGImages</folder>
<filename>000_1_0001_1_j.png</filename>
<size>
<width>640</width>
<height>640</height>
<depth>3</depth>
</size>
</annotation>

然后對realTrain和realTest的圖片進行標注，向默認XML添加新的信息（矩形信息）。

<annotation>
<folder>PNGImages</folder>
<filename>021_1_0001_1_j.png</filename>
<path>
C:\Users\xiao5\Desktop\realTest\PNGImages\021_1_0001_1_j.png
</path>
<source>
<database>Unknown</database>
</source>
<size>
<width>640</width>
<height>640</height>
<depth>3</depth>
</size>
<segmented>0</segmented>
<object>
<name>Straight</name>
<pose>Unspecified</pose>
<truncated>0</truncated>
<difficult>0</difficult>
<bndbox>
<xmin>13</xmin>
<ymin>22</ymin>
<xmax>573</xmax>
<ymax>580</ymax>
</bndbox>
</object>
</annotation>

處理完后利用我們添加的矩形將圖片裁剪下來并且重命名進行分類。主要思路是：解析XML文檔，根據<name>標簽進行分類，如果是直行、右轉、左轉、停止，那么就把它從原圖中裁剪下來并重命名,如果沒有<object>那么就認為是負樣本，其中在處理負樣本的時候，我進行了顏色識別，把一張負樣本圖片根據顏色（紅色、藍色）裁剪成幾張負樣本，這樣做的好處是：我們?cè)谶M(jìn)行交通標志的識別時，也是使用的顏色識別來選取到交通標志，我們從負樣本中分割出來的相近顏色樣本有利于負樣本的訓練，提高模型精度。

def produce_proposals(xml_dir, write_dir, square=False, min_size=30):
                ##返回proposal_num對象
    proposal_num = {}
    for cls_name in classes_name:
        proposal_num[cls_name] = 0

    index = 0
    for xml_file in os.listdir(xml_dir):
        img_path, labels = parse_xml(os.path.join(xml_dir,xml_file))
        img = cv2.imread(img_path)
        ##如果圖片中沒有出現定義的那幾種交通標志就把它當成負樣本
        if len(labels) == 0:
            neg_proposal_num = produce_neg_proposals(img_path, write_dir, min_size, square, proposal_num["background"])
            proposal_num["background"] = neg_proposal_num
        else:
            proposal_num = produce_pos_proposals(img_path, write_dir, labels, min_size, square=True, proposal_num=proposal_num)
            
        if index%100 == 0:
            print ("total xml file number = ", len(os.listdir(xml_dir)), "current xml file number = ", index)
            print ("proposal num = ", proposal_num)
        index += 1

    return proposal_num

為了提高模型的精確度，還對目標圖片（四類圖片）進行仿射變換來擴充訓練集。

def affine(img, delta_pix):
    rows, cols, _ = img.shape
    pts1 = np.float32([[0,0], [rows,0], [0, cols]])
    pts2 = pts1 + delta_pix
    M = cv2.getAffineTransform(pts1, pts2)
    res = cv2.warpAffine(img, M, (rows, cols))
    return res


def affine_dir(img_dir, write_dir, max_delta_pix):
    img_names = os.listdir(img_dir)
    img_names = [img_name for img_name in img_names if img_name.split(".")[-1]=="png"]
    for index, img_name in enumerate(img_names):
        img = cv2.imread(os.path.join(img_dir,img_name))
        save_name = os.path.join(write_dir, img_name.split(".")[0]+"f.png")
        delta_pix = np.float32(np.random.randint(-max_delta_pix,max_delta_pix+1,[3,2]))
        img_a = affine(img, delta_pix)
        cv2.imwrite(save_name, img_a)

二、HOG特征提取

處理好圖片后分別對訓練集和測試集進行特征提取得到imgTest_HOG.txt和imgTrain_HOG.txt

def hog_feature(img_array, resize=(64,64)):
    ##提取HOG特征

    img = cv2.cvtColor(img_array, cv2.COLOR_BGR2GRAY)
    img = cv2.resize(img, resize)
    bins = 9
    cell_size = (8, 8)
    cpb = (2, 2)
    norm = "L2"
    features = ft.hog(img, orientations=bins, pixels_per_cell=cell_size, 
                        cells_per_block=cpb, block_norm=norm, transform_sqrt=True)
    return features

def extra_hog_features_dir(img_dir, write_txt, resize=(64,64)):
    ##提取目錄中所有圖像HOG特征
   
    img_names = os.listdir(img_dir)
    img_names = [os.path.join(img_dir, img_name) for img_name in img_names]
    if os.path.exists(write_txt):
        os.remove(write_txt)
    
    with open(write_txt, "a") as f:
        index = 0
        for img_name in img_names:
            img_array = cv2.imread(img_name)
            features = hog_feature(img_array, resize)
            label_name = img_name.split("/")[-1].split("_")[0]
            label_num = img_label[label_name]
            row_data = img_name + "\t" + str(label_num) + "\t"
            
            for element in features:
                row_data = row_data + str(round(element,3)) + " "
            row_data = row_data + "\n"
            f.write(row_data)
            
            if index%100 == 0:
                print ("total image number = ", len(img_names), "current image number = ", index)
            index += 1

三、模型訓練

利用得到的HOG特征進行訓練模型得到svm_model.pkl

def load_hog_data(hog_txt):

    img_names = []
    labels = []
    hog_features = []
    with open(hog_txt, "r") as f:
        data = f.readlines()
        for row_data in data:
            row_data = row_data.rstrip()
            img_path, label, hog_str = row_data.split("\t")
            img_name = img_path.split("/")[-1]
            hog_feature = hog_str.split(" ")
            hog_feature = [float(hog) for hog in hog_feature]
            #print "hog feature length = ", len(hog_feature)
            img_names.append(img_name)
            labels.append(label)
            hog_features.append(hog_feature)
    return img_names, np.array(labels), np.array(hog_features)

def svm_train(hog_features, labels, save_path="./svm_model.pkl"):

    clf = SVC(C=10, tol=1e-3, probability = True)
    clf.fit(hog_features, labels)
    joblib.dump(clf, save_path)
    print ("finished.")

四、交通標志識別及實驗測試

交通標志識別的流程：顏色識別得到閾值范圍內的二值圖、然后進行輪廓識別、剔除多余矩陣。

def preprocess_img(imgBGR):
        ##將圖像由RGB模型轉化成HSV模型
    imgHSV = cv2.cvtColor(imgBGR, cv2.COLOR_BGR2HSV)
    Bmin = np.array([110, 43, 46])
    Bmax = np.array([124, 255, 255])
        ##使用inrange(HSV,lower,upper)設置閾值去除背景顏色
    img_Bbin = cv2.inRange(imgHSV,Bmin, Bmax)
    Rmin2 = np.array([165, 43, 46])
    Rmax2 = np.array([180, 255, 255])
    img_Rbin = cv2.inRange(imgHSV,Rmin2, Rmax2)
    img_bin = np.maximum(img_Bbin, img_Rbin)
    return img_bin

'''
提取輪廓,返回輪廓矩形框
'''
def contour_detect(img_bin, min_area=0, max_area=-1, wh_ratio=2.0):
    rects = []
    ##檢測輪廓，其中cv2.RETR_EXTERNAL只檢測外輪廓，cv2.CHAIN_APPROX_NONE 存儲所有的邊界點
    ##findContours返回三個值:第一個值返回img，第二個值返回輪廓信息，第三個返回相應輪廓的關系
    contours, hierarchy= cv2.findContours(img_bin.copy(), cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
    if len(contours) == 0:
        return rects
    max_area = img_bin.shape[0]*img_bin.shape[1] if max_area<0 else max_area
    for contour in contours:
        area = cv2.contourArea(contour)
        if area >= min_area and area <= max_area:
            x, y, w, h = cv2.boundingRect(contour)
            if 1.0*w/h < wh_ratio and 1.0*h/w < wh_ratio:
                rects.append([x,y,w,h])
    return rects

然后加載模型進行測驗

if __name__ == "__main__":
    cap = cv2.VideoCapture(0)
    cv2.namedWindow('camera')
    cv2.resizeWindow("camera",640,480)
    cols = int(cap.get(cv2.CAP_PROP_FRAME_WIDTH))
    rows = int(cap.get(cv2.CAP_PROP_FRAME_HEIGHT))
    clf = joblib.load("/home/xiao5/Desktop/Test2/svm_model.pkl")
    i=0
    while (1):
        i+=1
        ret, img = cap.read()
        img_bin = preprocess_img(img)
        min_area = img_bin.shape[0]*img.shape[1]/(25*25)
        rects = contour_detect(img_bin, min_area=min_area)
        if rects:
            Max_X=0
            Max_Y=0
            Max_W=0
            Max_H=0
            for r in rects:
                if r[2]*r[3]>=Max_W*Max_H:
                    Max_X,Max_Y,Max_W,Max_H=r
            proposal = img[Max_Y:(Max_Y+Max_H),Max_X:(Max_X+Max_W)]##用Numpy數組對圖像像素進行訪問時，應該先寫圖像高度所對應的坐標(y,row)，再寫圖像寬度對應的坐標(x,col)。
            cv2.rectangle(img,(Max_X,Max_Y), (Max_X+Max_W,Max_Y+Max_H), (0,255,0), 2)
            cv2.imshow("proposal", proposal)
            cls_prop = hog_extra_and_svm_class(proposal, clf)
            cls_prop = np.round(cls_prop, 2)
            cls_num = np.argmax(cls_prop)##找到最大相似度的索引
            if cls_names[cls_num] is not "background": 
                print(cls_names[cls_num])
            else:
                print("N/A")
        cv2.imshow('camera',img)
        cv2.waitKey(40)
    cv2.destroyAllWindows()
    cap.release()

到此這篇關于Python3+OpenCV實現簡單交通標志識別的文章就介紹到這了,更多相關Python3?OpenCV交通標志識別內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: