欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

opencv+python識別七段數碼顯示器的數字(數字識別)

 更新時間:2022年01月12日 11:14:23   作者:bashendixie5  
本文主要介紹了opencv+python識別七段數碼顯示器的數字(數字識別),文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下

一、什么是七段數碼顯示器

        七段LCD數碼顯示器有很多叫法:段碼液晶屏、段式液晶屏、黑白筆段屏、段碼LCD液晶屏、段式顯示器、TN液晶屏、段碼液晶顯示器、段碼屏幕、筆段式液晶屏、段碼液晶顯示屏、段式LCD、筆段式LCD等。

        如下圖,每個數字都由一個七段組件組成。

圖 2:單個七段顯示器的示例。 每個段都可以“打開”或“關閉”以表示特定的數字。

        七段顯示器總共可以呈現 128 種可能的狀態:

        我們要識別其中的0-9,如果用深度學習的方式有點小題大做,并且如果要進行應用還有很多前序工作需要進行,比如要確認識別什么設備的,怎么找到數字區域并進行分割等等。

二、創建opencv數字識別器

         我們這里進行使用空調恒溫器進行識別,首先整理下流程。

        1、定位恒溫器上的 LCD屏幕。

        2、提取 LCD的圖像。

        3、提取數字區域

        4、識別數字。

 我們創建名稱為recognize_digits.py的文件,代碼如下。僅思路供參考(因為代碼中的一些參數只適合測試圖片)

# import the necessary packages
from imutils.perspective import four_point_transform
from imutils import contours
import imutils
import cv2
# define the dictionary of digit segments so we can identify
# each digit on the thermostat
 
DIGITS_LOOKUP = {
	(1, 1, 1, 0, 1, 1, 1): 0,
	(0, 0, 1, 0, 0, 1, 0): 1,
	(1, 0, 1, 1, 1, 1, 0): 2,
	(1, 0, 1, 1, 0, 1, 1): 3,
	(0, 1, 1, 1, 0, 1, 0): 4,
	(1, 1, 0, 1, 0, 1, 1): 5,
	(1, 1, 0, 1, 1, 1, 1): 6,
	(1, 0, 1, 0, 0, 1, 0): 7,
	(1, 1, 1, 1, 1, 1, 1): 8,
	(1, 1, 1, 1, 0, 1, 1): 9
}
 
# load the example image
image = cv2.imread("example.jpg")#
# pre-process the image by resizing it, converting it to
# graycale, blurring it, and computing an edge map
image = imutils.resize(image, height=500)
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
blurred = cv2.GaussianBlur(gray, (5, 5), 0)
edged = cv2.Canny(blurred, 50, 200, 255)
 
# find contours in the edge map, then sort them by their
# size in descending order
cnts = cv2.findContours(edged.copy(), cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
cnts = imutils.grab_contours(cnts)
cnts = sorted(cnts, key=cv2.contourArea, reverse=True)
displayCnt = None
# loop over the contours
for c in cnts:
	# approximate the contour
	peri = cv2.arcLength(c, True)
	approx = cv2.approxPolyDP(c, 0.02 * peri, True)
	# if the contour has four vertices, then we have found
	# the thermostat display
	if len(approx) == 4:
		displayCnt = approx
		break
 
# extract the thermostat display, apply a perspective transform
# to it
warped = four_point_transform(gray, displayCnt.reshape(4, 2))
output = four_point_transform(image, displayCnt.reshape(4, 2))
 
# threshold the warped image, then apply a series of morphological
# operations to cleanup the thresholded image
thresh = cv2.threshold(warped, 0, 255, cv2.THRESH_BINARY_INV | cv2.THRESH_OTSU)[1]
kernel = cv2.getStructuringElement(cv2.MORPH_ELLIPSE, (1, 5))
thresh = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel)
 
# find contours in the thresholded image, then initialize the
# digit contours lists
cnts = cv2.findContours(thresh.copy(), cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
cnts = imutils.grab_contours(cnts)
digitCnts = []
# loop over the digit area candidates
for c in cnts:
	# compute the bounding box of the contour
	(x, y, w, h) = cv2.boundingRect(c)
	# if the contour is sufficiently large, it must be a digit
	if w >= 15 and (h >= 30 and h <= 40):
		digitCnts.append(c)
 
# sort the contours from left-to-right, then initialize the
# actual digits themselves
digitCnts = contours.sort_contours(digitCnts, method="left-to-right")[0]
digits = []
 
# loop over each of the digits
for c in digitCnts:
	# extract the digit ROI
	(x, y, w, h) = cv2.boundingRect(c)
	roi = thresh[y:y + h, x:x + w]
	# compute the width and height of each of the 7 segments
	# we are going to examine
	(roiH, roiW) = roi.shape
	(dW, dH) = (int(roiW * 0.25), int(roiH * 0.15))
	dHC = int(roiH * 0.05)
	# define the set of 7 segments
	segments = [
		((0, 0), (w, dH)),	# top
		((0, 0), (dW, h // 2)),	# top-left
		((w - dW, 0), (w, h // 2)),	# top-right
		((0, (h // 2) - dHC) , (w, (h // 2) + dHC)), # center
		((0, h // 2), (dW, h)),	# bottom-left
		((w - dW, h // 2), (w, h)),	# bottom-right
		((0, h - dH), (w, h))	# bottom
	]
	on = [0] * len(segments)
 
	# loop over the segments
	for (i, ((xA, yA), (xB, yB))) in enumerate(segments):
		# extract the segment ROI, count the total number of
		# thresholded pixels in the segment, and then compute
		# the area of the segment
		segROI = roi[yA:yB, xA:xB]
		total = cv2.countNonZero(segROI)
		area = (xB - xA) * (yB - yA)
		# if the total number of non-zero pixels is greater than
		# 50% of the area, mark the segment as "on"
		if total / float(area) > 0.5:
			on[i]= 1
	# lookup the digit and draw it on the image
	digit = DIGITS_LOOKUP[tuple(on)]
	digits.append(digit)
	cv2.rectangle(output, (x, y), (x + w, y + h), (0, 255, 0), 1)
	cv2.putText(output, str(digit), (x - 10, y - 10),
		cv2.FONT_HERSHEY_SIMPLEX, 0.65, (0, 255, 0), 2)
 
# display the digits
print(u"{}{}.{} \u00b0C".format(*digits))
cv2.imshow("Input", image)
cv2.imshow("Output", output)
cv2.waitKey(0)

原始圖片

邊緣檢測

識別的結果圖片

到此這篇關于opencv+python識別七段數碼顯示器的數字(數字識別)的文章就介紹到這了,更多相關opencv數字識別內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!

相關文章

  • 利用Python繪制端午節祝福動畫

    利用Python繪制端午節祝福動畫

    這篇文章主要介紹了如何利用Python繪制一個端午節的祝福動畫,文中的示例代碼講解詳細,對我們學習Python有一定的幫助,需要的可以參考一下
    2023-06-06
  • PyQt5 在label顯示的圖片中繪制矩形的方法

    PyQt5 在label顯示的圖片中繪制矩形的方法

    今天小編就為大家分享一篇PyQt5 在label顯示的圖片中繪制矩形的方法,具有很好的參考價值。希望對大家有所幫助。一起跟隨小編過來看看吧
    2019-06-06
  • 解決win64 Python下安裝PIL出錯問題(圖解)

    解決win64 Python下安裝PIL出錯問題(圖解)

    這篇文章主要介紹了解決win64 Python下安裝PIL出錯問題,文中的解決方法也很簡單,需要的朋友參考下吧
    2018-09-09
  • 對numpy中向量式三目運算符詳解

    對numpy中向量式三目運算符詳解

    今天小編就為大家分享一篇對numpy中向量式三目運算符詳解,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧
    2018-10-10
  • python爬蟲獲取小區經緯度以及結構化地址

    python爬蟲獲取小區經緯度以及結構化地址

    這篇文章主要為大家詳細介紹了python爬蟲獲取小區經緯度,以及結構化的地址,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2018-12-12
  • python處理兩種分隔符的數據集方法

    python處理兩種分隔符的數據集方法

    今天小編就為大家分享一篇python處理兩種分隔符的數據集方法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧
    2018-12-12
  • Python實現快速將pdf文件剪切成多個圖片

    Python實現快速將pdf文件剪切成多個圖片

    這篇文章主要為大家詳細介紹了如何使用Python實現快速將pdf文件剪切成多個圖片,文中的示例代碼講解詳細,有需要的小伙伴可以跟隨小編一起學習一下
    2024-01-01
  • python celery分布式任務隊列的使用詳解

    python celery分布式任務隊列的使用詳解

    這篇文章主要介紹了python celery分布式任務隊列的使用詳解,Celery 是一個 基于python開發的分布式異步消息任務隊列,通過它可以輕松的實現任務的異步處理, 如果你的業務場景中需要用到異步任務,就可以考慮使用celery,需要的朋友可以參考下
    2019-07-07
  • pytest解讀fixtures中yield與addfinalizer區別

    pytest解讀fixtures中yield與addfinalizer區別

    這篇文章主要為大家介紹了pytest官方解讀fixtures中yield與addfinalizer區別,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪
    2022-06-06
  • django項目中新增app的2種實現方法

    django項目中新增app的2種實現方法

    這篇文章主要介紹了django項目中新增app的2種實現方法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧
    2020-04-04

最新評論