欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

Linux下rm誤刪除文件的三種恢復方法

 更新時間:2022年12月01日 14:23:55   作者:NEU_ShuaiCheng  
一下午寫的程序就被rm掉了,幸好只是一個文件,第二天很快又重新寫了一遍。但是很多人可能就不像我這么幸運了,本文收集了一些在Linux下恢復rm刪除的文件的方法,需要的朋友可以參考下

對于rm,很多人都有慘痛的教訓。我也遇到一次,一下午寫的程序就被rm掉了,幸好只是一個文件,第二天很快又重新寫了一遍。但是很多人可能就不像我這么幸運了。本文收集了一些在Linux下恢復rm刪除的文件的方法,給大家作為參考。

1.幾點建議避免誤刪

 首先,最好的方法是避免這個問題,以下是幾點建議:

  1、rm -rf誤操作的后果是可怕的,rm -f也要三思而行,不能輕易使用。

  2、做好數據備份。

  3、用一些策略避免出錯:

  提倡在shell下用 TAB 補全,用腳本執行任務,減少出錯的機會。或者編寫一個腳本,起名rm,在腳本里將真實的rm改為mv ,將刪除的都mv到一個指定的目錄里面,定期清理。

  那么rm刪除的文件還能恢復嗎?

  rm的man里面有如下說法:

  請注意,如果使用 rm 來刪除文件,通常仍可以將該文件恢復原狀。如果想保證該文件的內容無法還原,請考慮使用 shred。

  所以理論上rm刪除的文件是還能恢復的。刪掉文件其實只是將指向數據塊的索引點(information nodes)釋放,只要不被覆蓋,數據其實還在硬盤上,關鍵在于找出索引點,然后將其所指數據塊內的數據抓出,再保存到另外的分區。在用rm誤刪除文件后,我們要做的第一件事就是保證不再向誤刪文件的分區寫數據。

2.使用lsof命令恢復

lsof命令用于查看你進程開打的文件,打開文件的進程,進程打開的端口(TCP、UDP)。找回/恢復刪除的文件。是十分方便的系統監視工具,因?yàn)閘sof命令需要訪問核心內存和各種文件,所以需要root用戶執行。

在linux環境下,任何事物都以文件的形式存在,通過文件不僅僅可以訪問常規數據,還可以訪問網絡連接和硬件。所以如傳輸控制協議 (TCP) 和用戶數據報協議 (UDP) 套接字等,系統在后臺都為該應用程序分配了一個文件描述符,無論這個文件的本質如何,該文件描述符為應用程序與基礎操作系統之間的交互提供了通用接口。因?yàn)閼?yīng)用程序打開文件的描述符列表提供了大量關于這個應用程序本身的信息,因此通過lsof工具能夠查看這個列表對系統監測以及排錯將是很有幫助的。

1.語法

lsof(選項)

2.參數

-a:列出打開文件存在的進程; 
-c<進程名>:列出指定進程所打開的文件; 
-g:列出GID號進程詳情; 
-d<文件號>:列出占用該文件號的進程; 
+d<目錄>:列出目錄下被打開的文件; 
+D<目錄>:遞歸列出目錄下被打開的文件; 
-n<目錄>:列出使用NFS的文件; 
-i<條件>:列出符合條件的進程。(4、6、協議、:端口、 @ip ) 
-p<進程號>:列出指定進程號所打開的文件; 
-u:列出UID號進程詳情; 
-h:顯示幫助信息; 
-v:顯示版本信息。

3.使用

查看

lsof -i:(端口) 查看這個端口有那些進程在訪問,比如22端口

shell> lsof -i:22
COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
sshd     1939 root    3u  IPv4  12317      0t0  TCP *:ssh (LISTEN)
sshd     1939 root    4u  IPv6  12321      0t0  TCP *:ssh (LISTEN)
sshd     2790 root    3u  IPv4  15229      0t0  TCP 192.168.178.128:ssh->192.168.178.1:64601 (ESTABLISHED)
sshd     2824 root    3u  IPv4  15528      0t0  TCP 192.168.178.128:ssh->192.168.178.1:64673 (ESTABLISHED)
sshd     2990 root    3u  IPv4  15984      0t0  TCP 192.168.178.128:ssh->192.168.178.1:64686 (ESTABLISHED)
sshd    14695 root    3u  IPv4  39558      0t0  TCP 192.168.178.128:ssh->192.168.178.1:49662 (ESTABLISHED)

lsof輸出各列信息的意義如下:

  • COMMAND:進程的名稱
  • PID:進程標識符
  • USER:進程所有者
  • FD:文件描述符,應用程序通過文件描述符識別該文件。如cwd、txt等
  • TYPE:文件類型,如DIR、REG等
  • DEVICE:指定磁盤的名稱
  • SIZE:文件的大小
  • NODE:索引節點(文件在磁盤上的標識)
  • NAME:打開文件的確切名稱

恢復文件

利用lsof可以恢復一些系統日志,前提是這個進程必須存在。這里就拿最常用的/var/log/messages來舉例說明,大家在做測試的時候最好先備份一下。

#備份
shell> cp /var/log/message /var/log/message_bac
shell> lsof |grep /var/log/message
rsyslogd   1737      root    1w      REG                8,2   5716123     652638 /var/log/messages

進程在運行中,接下來我就把/var/log/messages這個文件刪掉

shell> rm /var/log/messages

刪掉之后,我再來看看這個進程的變化

shell> lsof |grep /var/log/messages
rsyslogd   1737      root    1w      REG                8,2   5716123     652638 /var/log/messages (deleted)

大家看到有變化了吧, 對比兩個之后發現多了(deleted)。要找到這個文件在哪還要看看這個

PID:1737 FD:1 那我們有直接進入/proc/1737/FD/1用ll查看一下

shell> cd /proc/1737/fd/
shell> ll

total 0
lrwx------ 1 root root 64 Dec 23 13:00 0 -> socket:[11442]
l-wx------ 1 root root 64 Dec 23 13:00 1 -> /var/log/messages (deleted)
l-wx------ 1 root root 64 Dec 23 13:00 2 -> /var/log/secure
lr-x------ 1 root root 64 Dec 23 13:00 3 -> /proc/kmsg
l-wx------ 1 root root 64 Dec 23 13:00 4 -> /var/log/maillog

看到了1對應/var/log/messages (deleted),看看文件是不是我們要的文件:

shell> head -5 1
Nov 14 03:11:11 localhost kernel: imklog 5.8.10, log source = /proc/kmsg started.
Nov 14 03:11:11 localhost rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1241" x-info="http://www.rsyslog.com"] start
Nov 14 03:11:11 localhost kernel: Initializing cgroup subsys cpuset
Nov 14 03:11:11 localhost kernel: Initializing cgroup subsys cpu
Nov 14 03:11:11 localhost kernel: Linux version 2.6.32-431.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013

對比備份文件:

shell> head -5 /var/log/message_bac
Nov 14 03:11:11 localhost kernel: imklog 5.8.10, log source = /proc/kmsg started.
Nov 14 03:11:11 localhost rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1241" x-info="http://www.rsyslog.com"] start
Nov 14 03:11:11 localhost kernel: Initializing cgroup subsys cpuset
Nov 14 03:11:11 localhost kernel: Initializing cgroup subsys cpu
Nov 14 03:11:11 localhost kernel: Linux version 2.6.32-431.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013

對比發現數據是一樣的,恢復

shell> cat 1 > /var/log/messages

再次提醒,恢復前提是這個進程必須存在。

3.使用extundelete工具

extundelete工具安裝

wget https://nchc.dl.sourceforge.net/project/extundelete/extundelete/0.2.4/extundelete-0.2.4.tar.bz2

解壓該文件tar jxvf extundelete-0.2.4.tar.bz2

若報這種錯誤

[root@docking ~]# tar jxvf extundelete-0.2.4.tar.bz2 
tar (child): bzip2:無法 exec: 沒有那個文件或目錄
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

則使用yum -y install bzip2進行解決

[root@docking ~]# tar jxvf extundelete-0.2.4.tar.bz2 
extundelete-0.2.4/
extundelete-0.2.4/acinclude.m4
extundelete-0.2.4/missing
extundelete-0.2.4/autogen.sh
extundelete-0.2.4/aclocal.m4
extundelete-0.2.4/configure
extundelete-0.2.4/LICENSE
extundelete-0.2.4/README
...................................................
cd  extundelete-0.2.4
./configure 

若這步驟報錯

[root@docking extundelete-0.2.4]# ./configure 
Configuring extundelete 0.2.4
configure: error: in `/root/extundelete-0.2.4':
configure: error: C++ compiler cannot create executables
See `config.log' for more details

則使用yum -y install gcc-c++解決.

若執行上一步仍然報錯,

[root@docking extundelete-0.2.4]# ./configure 
Configuring extundelete 0.2.4
configure: error: Can't find ext2fs library

則使用yum -y install e2fsprogs e2fsprogs-devel來解決。
#Ubuntu的解決辦法為sudo apt-get install e2fslibs-dev e2fslibs-dev

不出意外的話到這里應該configure能夠順利完成.

[root@docking extundelete-0.2.4]# ./configure 
Configuring extundelete 0.2.4
Writing generated files to disk
[root@docking extundelete-0.2.4]# 

最后make然后 make install

[root@docking extundelete-0.2.4]# make
make -s all-recursive
Making all in src
extundelete.cc: 在函數‘ext2_ino_t find_inode(ext2_filsys, ext2_filsys, ext2_inode*, std::string, int)'中:
extundelete.cc:1272:29: 警告:在 {} 內將‘search_flags'從‘int'轉換為較窄的類型‘ext2_ino_t {aka unsigned int}' [-Wnarrowing]
    buf, match_name2, priv, 0};
                             ^
[root@docking extundelete-0.2.4]# make install
Making install in src
  /usr/bin/install -c extundelete '/usr/local/bin'

extundelete安裝完成.

掃描誤刪除的文件:

使用df -lh查看掛載:

taroballs@taroballs-PC:~$ df -lh
文件系統        容量  已用  可用 已用% 掛載點
udev            1.9G     0  1.9G    0% /dev
tmpfs           387M  1.8M  385M    1% /run
/dev/sda2        92G   61G   26G   71% /
tmpfs           1.9G   49M  1.9G    3% /dev/shm
tmpfs           5.0M  4.0K  5.0M    1% /run/lock
tmpfs           1.9G     0  1.9G    0% /sys/fs/cgroup
/dev/sda3       104G   56G   44G   57% /home
tmpfs           387M   40K  387M    1% /run/user/1000
/dev/sda4        70G   20G   47G   30% /media/taroballs/d8423f8c-d687-4c03-a7c8-06a7fb57f96d
/dev/sdb1       6.8G  4.1G  2.8G   60% /media/taroballs/taroballs
/dev/sr0        4.0G  4.0G     0  100% /media/taroballs/2018-01-16-12-36-00-00
taroballs@taroballs-PC:~$ cd /media/taroballs/taroballs/
taroballs@taroballs-PC:/media/taroballs/taroballs$ 

可以看到,我們的目錄/media/taroballs/taroballs
掛載到/dev/sdb1 這個文件系統中.

umount我們的掛載盤比如:

taroballs@taroballs-PC:~$ df -lh | grep /dev/sdb1
/dev/sdb1       6.8G  4.1G  2.8G   60% /media/taroballs/taroballs

umount這個目錄

taroballs@taroballs-PC:~$ umount /media/taroballs/taroballs
taroballs@taroballs-PC:~$ df -lh | grep /dev/sdb1
taroballs@taroballs-PC:~$ 
#記得刪除一定要后umount哦,不然二次寫入誰也幫不了你呢。

通過inode節點恢復

taroballs@taroballs-PC:~$ mkdir recovertest
taroballs@taroballs-PC:~$ cd recovertest/
taroballs@taroballs-PC:~/recovertest$ 

執行恢復extundelete /dev/sdb1 --inode 2

taroballs@taroballs-PC:/media/taroballs/taroballs$ sudo extundelete /dev/sdb1 --inode 2
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 8 groups loaded.
Group: 0
Contents of inode 2:
 
.
.省略N行
 
File name                                       | Inode number | Deleted status
.                                                 2
..                                                2
deletetest                                        12             Deleted
tmppasswd                                            14             Deleted

通過掃描發現了我們刪除的文件夾,現在執行恢復操作。
(1)恢復單一文件tmppasswd

taroballs@taroballs-PC:~/recovertest$  extundelete /dev/sdb1 --restore-file passwd   
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 8 groups loaded.
Loading journal descriptors ... 46 descriptors loaded.
Successfully restored file tmppasswd

恢復文件是放到了當前目錄RECOVERED_FILES。
查看恢復的文件:

taroballs@taroballs-PC:~/recovertest$ cat tmppasswd 
tcpdump:x:172:72::/:/sbin/nologin

(2)恢復目錄deletetest

extundelete /dev/sdb1 --restore-directory  deletetest
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 8 groups loaded.
Loading journal descriptors ... 46 descriptors loaded.
Searching for recoverable inodes in directory deletetest ... 
5 recoverable inodes found.
Looking through the directory structure for deleted files ... 

(3)恢復所有

taroballs@taroballs-PC:~/recovertest$ extundelete /dev/sdb1 --restore-all
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 8 groups loaded.
Loading journal descriptors ... 46 descriptors loaded.
Searching for recoverable inodes in directory / ... 
5 recoverable inodes found.
Looking through the directory structure for deleted files ... 
0 recoverable inodes still lost. 
taroballs@taroballs-PC:~/recovertest$ tree 
backuptest/
├── deletetest
│   └── innerfolder
│       └── deletefile.txt
└── tmppasswd

2 directories, 2 files

(4)恢復指定inode

taroballs@taroballs-PC:~/recovertest$ extundelete /dev/sdb1 --restore-inode 14
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 8 groups loaded.
Loading journal descriptors ... 46 descriptors loaded.
taroballs@taroballs-PC:~/recovertest$ cat file.14 
tcpdump:x:172:72::/:/sbin/nologin
#注意恢復inode的時候,恢復 出來的文件名和之前不一樣,需要單獨進行改名。

最后附上extundelete的用法:

$ extundelete --help
Usage: extundelete [options] [--] device-file
Options:
  --version, -[vV]       Print version and exit successfully.
  --help,                Print this help and exit successfully.
  --superblock           Print contents of superblock in addition to the rest.
                         If no action is specified then this option is implied.
  --journal              Show content of journal.
  --after dtime          Only process entries deleted on or after 'dtime'.
  --before dtime         Only process entries deleted before 'dtime'.
Actions:
  --inode ino            Show info on inode 'ino'.
  --block blk            Show info on block 'blk'.
  --restore-inode ino[,ino,...]
                         Restore the file(s) with known inode number 'ino'.
                         The restored files are created in ./RECOVERED_FILES
                         with their inode number as extension (ie, file.12345).
  --restore-file 'path'  Will restore file 'path'. 'path' is relative to root
                         of the partition and does not start with a '/'
                         The restored file is created in the current
                         directory as 'RECOVERED_FILES/path'.
  --restore-files 'path' Will restore files which are listed in the file 'path'.
                         Each filename should be in the same format as an option
                         to --restore-file, and there should be one per line.
  --restore-directory 'path'
                         Will restore directory 'path'. 'path' is relative to the
                         root directory of the file system.  The restored
                         directory is created in the output directory as 'path'.
  --restore-all          Attempts to restore everything.
  -j journal             Reads an external journal from the named file.
  -b blocknumber         Uses the backup superblock at blocknumber when opening
                         the file system.
  -B blocksize           Uses blocksize as the block size when opening the file
                         system.  The number should be the number of bytes.
  --log 0                Make the program silent.
  --log filename         Logs all messages to filename.
--log D1=0,D2=filename   Custom control of log messages with comma-separated
   Examples below:       list of options.  Dn must be one of info, warn, or
   --log info,error      error.  Omission of the '=name' results in messages
   --log warn=0          with the specified level to be logged to the console.
   --log error=filename  If the parameter is '=0', logging for the specified
                         level will be turned off.  If the parameter is
                         '=filename', messages with that level will be written
                         to filename.
   -o directory          Save the recovered files to the named directory.
                         The restored files are created in a directory
                         named 'RECOVERED_FILES/' by default.

到此這篇關于Linux下rm誤刪除文件的三種恢復方法的文章就介紹到這了,更多相關Linux rm刪除文件恢復內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!

相關文章

  • Shell編程之/bin/bash和/bin/sh的區別淺析

    Shell編程之/bin/bash和/bin/sh的區別淺析

    在redhat的系統中,sh是一個到bash的軟鏈接,但是如果運行如下程序會產生不一樣的結果,下面這篇文章主要給大家介紹了關于Shell編程之/bin/bash和/bin/sh的區別的相關資料,需要的朋友可以參考下
    2022-07-07
  • Shell?echo、printf、test命令的具體使用

    Shell?echo、printf、test命令的具體使用

    本文主要介紹了Shell?echo、printf、test命令的具體使用,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2024-03-03
  • Linux Shell 如何獲取參數的方法

    Linux Shell 如何獲取參數的方法

    這篇文章主要介紹了Linux Shell 如何獲取參數的方法,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2020-10-10
  • linux下2個檢查tcp連接的命令

    linux下2個檢查tcp連接的命令

    這篇文章主要介紹了linux下2個檢查tcp連接的命令,需要的朋友可以參考下
    2016-08-08
  • linux下安裝配置Memcache和PHP環境的實現

    linux下安裝配置Memcache和PHP環境的實現

    下面小編就為大家?guī)硪黄猯inux下安裝配置Memcache和PHP環境的實現。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2017-02-02
  • 淺談CI腳本異常退出問題定位

    淺談CI腳本異常退出問題定位

    下面小編就為大家?guī)硪黄獪\談CI腳本異常退出問題定位。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2017-11-11
  • 一些Linux Shell中的權限相關知識總結

    一些Linux Shell中的權限相關知識總結

    這篇文章主要介紹了一些Linux Shell中的權限相關知識總結,使Linux入門學習中的基礎知識,需要的朋友可以參考下
    2015-07-07
  • 普通用戶啟動supervisor報HTTP錯誤(strace)解決分析

    普通用戶啟動supervisor報HTTP錯誤(strace)解決分析

    這篇文章主要為大家介紹了普通用戶啟動supervisor報HTTP錯誤strace的問題解決分析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪
    2023-07-07
  • linux定時備份MySQL數據庫并刪除以前的備份文件(推薦)

    linux定時備份MySQL數據庫并刪除以前的備份文件(推薦)

    這篇文章主要介紹了linux定時備份MySQL數據庫并刪除以前的備份文件,本文給大家介紹的非常詳細,具有一定的參考借鑒價值,需要的朋友可以參考下
    2020-01-01
  • shell命令while循環中使用sleep命令代碼示例

    shell命令while循環中使用sleep命令代碼示例

    這篇文章主要介紹了shell命令while循環中使用sleep命令代碼示例,分享了相關代碼示例,小編覺得還是挺不錯的,具有一定借鑒價值,需要的朋友可以參考下
    2018-02-02

最新評論