欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

Python海龜turtle基礎知識大全以及畫圖集合實例

 更新時間:2023年04月20日 10:00:21   作者:M_Q_T  
turtle是一個簡單的繪圖工具,它提供了一個海龜,你可以把它理解為一個機器人,只聽得懂有限的指令,下面這篇文章主要給大家介紹了關于Python海龜turtle基礎知識大全以及畫圖集合的相關資料,需要的朋友可以參考下

Turtle圖形庫

Turtle 庫是 Python 內置的圖形化模塊,屬于標準庫之一,位于 Python 安裝目錄的 lib 文件夾下,常用函數有以下幾種:

一.Turtle繪圖的基礎知識

畫布是turtle用于繪圖區域,我們可以設置它的大小和初始位置。

1.設置畫布大小

turtle.screensize(canvwidth=None, canvheight=None, bg=None),參數分別對應畫布的寬(單位像素), 高, 背景顏色。

turtle.screensize(1000,800, "blue")
turtle.screensize() #返回默認大小(500, 400)
turtle.setup(width=0.5, height=0.75, startx=None, starty=None)

width, height: 輸入寬和高為整數時, 表示像素; 為小數時, 表示占據電腦屏幕的比例,(startx, starty): 這一坐標表示矩形窗口左上角頂點的位置, 如果為空,則窗口位于屏幕中心。

2.畫筆的狀態

在畫布上,默認有一個坐標原點為畫布中心的坐標軸,坐標原點上有一只面朝x軸正方向小烏龜。這里我們描述小烏龜時使用了兩個詞語:坐標原點(位置),面朝x軸正方向(方向), turtle繪圖中,就是使用位置方向描述小烏龜(畫筆)的狀態。

turtle.pensize() # 設置畫筆的寬度;
turtle.pencolor()# 沒有參數傳入,返回當前畫筆顏色,傳入?yún)?shù)設置畫筆顏色,可以是字符串如"green", "red",也可以是RGB 3元組。
turtle.speed(speed)#設置畫筆移動速度,畫筆繪制的速度范圍[0,10]整數,數字越大越快。

3.使用turtle繪圖主要分為3種命令代碼,分別為運動命令、畫筆控制命令和全局控制命令。

畫筆運動命令代碼

  • turtle.forward(distance)—向當前畫筆方向移動distance像素長度
  • turtle.backward(distance)—向當前畫筆相反方向移動distance像素長度
  • turtle.right(degree)—順時針移動degree° turtle.left(degree)—逆時針移動degree°
  • turtle.pendown()—移動時繪制圖形,缺省時也為繪制 turtle.goto(x,y)—將畫筆移動到坐標為x,y的位置
  • turtle.penup()—提起筆移動,不繪制圖形,用于另起一個地方繪制
  • turtle.circle()—畫圓,半徑為正(負),表示圓心在畫筆的左邊(右邊)畫圓 setx( )—將當前x軸移動到指定位置
  • sety( )—將當前y軸移動到指定位置 setheading(angle)—設置當前朝向?yàn)閍ngle角度
  • home()—設置當前畫筆位置為原點,朝向東 dot®—繪制一個指定直徑和顏色的圓點

畫筆控制命令代碼

  • turtle.fillcolor(colorstring)—繪制圖形的填充顏色 turtle.color(color1,color2)—同時設置pencolor=color1, fillcolor=color2
  • turtle.filling()—返回當前是否在填充狀態 turtle.begin_fill()—準備開始填充圖形
  • turtle.end_fill()—填充完成 turtle.hideturtle()—隱藏畫筆的turtle形狀
  • turtle.showturtle()—顯示畫筆的turtle形狀

全局控制命令代碼

  • turtle.clear()—清空turtle窗口,但是turtle的位置和狀態不會改變
  • turtle.reset()—清空窗口,重置turtle狀態為起始狀態 turtle.undo()—撤銷上一個turtle動作
  • turtle.isvisible()—返回當前turtle是否可見 stamp()—復制當前圖形
  • turtle.write(s[,font=(“fontname”,font_size,“font_type”)])—文本,s為文本內容,font是字體的參數,分別為字體名稱,大小和類型;font為可選項,font參數也是可選項

二.具體實例

0.櫻花樹

from turtle import *
from random import *
from math import *
def tree(n, l):
    pd ()  # 下筆
    # 陰影效果
    t = cos ( radians ( heading () + 45 ) ) / 8 + 0.25
    pencolor ( t, t, t )
    pensize ( n / 3 )
    forward ( l )  # 畫樹枝
 
    if n > 0:
        b = random () * 15 + 10  # 右分支偏轉角度
        c = random () * 15 + 10  # 左分支偏轉角度
        d = l * (random () * 0.25 + 0.7)  # 下一個分支的長度
        # 右轉一定角度,畫右分支
        right ( b )
        tree ( n - 1, d )
        # 左轉一定角度,畫左分支
        left ( b + c )
        tree ( n - 1, d )
        # 轉回來
        right ( c )
    else:
        # 畫葉子
        right ( 90 )
        n = cos ( radians ( heading () - 45 ) ) / 4 + 0.5
        ran = random ()
        # 這里相比于原來隨機添加了填充的圓圈,讓櫻花葉子看起來更多一點
        if (ran > 0.7):
            begin_fill ()
            circle ( 3 )
            fillcolor ( 'pink' )
        # 把原來隨機生成的葉子換成了統一的粉色
        pencolor ( "pink" )
        circle ( 3 )
        if (ran > 0.7):
            end_fill ()
        left ( 90 )
        # 添加0.3倍的飄落葉子
        if (random () > 0.7):
            pu ()
            # 飄落
            t = heading ()
            an = -40 + random () * 40
            setheading ( an )
            dis = int ( 800 * random () * 0.5 + 400 * random () * 0.3 + 200 * random () * 0.2 )
            forward ( dis )
            setheading ( t )
            # 畫葉子
            pd ()
            right ( 90 )
            n = cos ( radians ( heading () - 45 ) ) / 4 + 0.5
            pencolor ( n * 0.5 + 0.5, 0.4 + n * 0.4, 0.4 + n * 0.4 )
            circle ( 2 )
            left ( 90 )
            pu ()
            # 返回
            t = heading ()
            setheading ( an )
            backward ( dis )
            setheading ( t )
    pu ()
    backward ( l )  # 退回
 
 
bgcolor ( 0.956, 0.9255, 0.9882 )  # 設置背景色(把灰色換成淡紫色)
ht ()  # 隱藏turtle
speed ( 0 )  # 速度 1-10漸進,0 最快
tracer ( 0, 0 )
pu ()  # 抬筆
backward ( 50 )
left ( 90 )  # 左轉90度
pu ()  # 抬筆
backward ( 300 )  # 后退300
tree ( 12, 100 )  # 遞歸7層
done ()

1.彩色螺旋線

from turtle import *
import turtle
t = Turtle()
t.pensize(2)
turtle.bgcolor("black")
colors = ["red", "yellow", 'purple', 'blue']
t._tracer(False)
for x in range(400):
    for y in range(200):
        t.forward(x * y)
        t.color(colors[x % 4])
        t.left(91)
t._tracer(True)
done()

?2.小蟒蛇 

import turtle
turtle.penup()
turtle.pencolor("blue")
turtle.forward(-200)
turtle.pendown()
turtle.pensize(10)
turtle.right(45)
for i in range(4):
    turtle.circle(40, 100)
    turtle.circle(-40, 60)
turtle.circle(40, 80 / 2)
turtle.fd(30)
turtle.circle(16, 150)
turtle.fd(100)
turtle.done()

?3.畫佩奇

 
import time
import turtle as t
 
t.pensize(4) # 設置畫筆的大小
t.colormode(255) # 設置GBK顏色范圍為0-255
t.color((255,155,192),"pink") # 設置畫筆顏色和填充顏色(pink)
t.setup(840,500) # 設置主窗口的大小為840*500
t.speed(10) # 設置畫筆速度為10
#鼻子
t.pu() # 提筆
t.goto(-100,100) # 畫筆前往F坐標(-100,100)
t.pd() # 下筆
t.seth(-30) # 筆的角度為-30°
t.begin_fill() # 外形填充的開始標志
a=0.4
for i in range(120):
    if 0 <= i < 30 or 60 <= i < 90:
        a=a+0.08
        t.lt(3) #向左轉3度
        t.fd(a) #向前走a的步長
    else:
        a=a-0.08
        t.lt(3)
        t.fd(a)
t.end_fill() # 依據輪廓填充
t.pu() # 提筆
t.seth(90) # 筆的角度為90度
t.fd(25) # 向前移動25
t.seth(0) # 轉換畫筆的角度為0
t.fd(10)
t.pd()
t.pencolor(255,155,192) # 設置畫筆顏色
t.seth(10)
t.begin_fill()
t.circle(5) # 畫一個半徑為5的圓
t.color(160,82,45) # 設置畫筆和填充顏色
t.end_fill()
t.pu()
t.seth(0)
t.fd(20)
t.pd()
t.pencolor(255,155,192)
t.seth(10)
t.begin_fill()
t.circle(5)
t.color(160,82,45)
t.end_fill()
#頭
t.color((255,155,192),"pink")
t.pu()
t.seth(90)
t.fd(41)
t.seth(0)
t.fd(0)
t.pd()
t.begin_fill()
t.seth(180)
t.circle(300,-30) # 順時針畫一個半徑為300,圓心角為30°的園
t.circle(100,-60)
t.circle(80,-100)
t.circle(150,-20)
t.circle(60,-95)
t.seth(161)
t.circle(-300,15)
t.pu()
t.goto(-100,100)
t.pd()
t.seth(-30)
a=0.4
for i in range(60):
    if 0<=i<30 or 60<=i<90:
        a=a+0.08
        t.lt(3) #向左轉3度
        t.fd(a) #向前走a的步長
    else:
        a=a-0.08
        t.lt(3)
        t.fd(a)
        t.end_fill()
#耳朵
t.color((255,155,192),"pink")
t.pu()
t.seth(90)
t.fd(-7)
t.seth(0)
t.fd(70)
t.pd()
t.begin_fill()
t.seth(100)
t.circle(-50,50)
t.circle(-10,120)
t.circle(-50,54)
t.end_fill()
t.pu()
t.seth(90)
t.fd(-12)
t.seth(0)
t.fd(30)
t.pd()
t.begin_fill()
t.seth(100)
t.circle(-50,50)
t.circle(-10,120)
t.circle(-50,56)
t.end_fill()
#眼睛
t.color((255,155,192),"white")
t.pu()
t.seth(90)
t.fd(-20)
t.seth(0)
t.fd(-95)
t.pd()
t.begin_fill()
t.circle(15)
t.end_fill()
t.color("black")
t.pu()
t.seth(90)
t.fd(12)
t.seth(0)
t.fd(-3)
t.pd()
t.begin_fill()
t.circle(3)
t.end_fill()
t.color((255,155,192),"white")
t.pu()
t.seth(90)
t.fd(-25)
t.seth(0)
t.fd(40)
t.pd()
t.begin_fill()
t.circle(15)
t.end_fill()
t.color("black")
t.pu()
t.seth(90)
t.fd(12)
t.seth(0)
t.fd(-3)
t.pd()
t.begin_fill()
t.circle(3)
t.end_fill()
#腮
t.color((255,155,192))
t.pu()
t.seth(90)
t.fd(-95)
t.seth(0)
t.fd(65)
t.pd()
t.begin_fill()
t.circle(30)
t.end_fill()
#嘴
t.color(239,69,19)
t.pu()
t.seth(90)
t.fd(15)
t.seth(0)
t.fd(-100)
t.pd()
t.seth(-80)
t.circle(30,40)
t.circle(40,80)
#身體
t.color("red",(255,99,71))
t.pu()
t.seth(90)
t.fd(-20)
t.seth(0)
t.fd(-78)
t.pd()
t.begin_fill()
t.seth(-130)
t.circle(100,10)
t.circle(300,30)
t.seth(0)
t.fd(230)
t.seth(90)
t.circle(300,30)
t.circle(100,3)
t.color((255,155,192),(255,100,100))
t.seth(-135)
t.circle(-80,63)
t.circle(-150,24)
t.end_fill()
#手
t.color((255,155,192))
t.pu()
t.seth(90)
t.fd(-40)
t.seth(0)
t.fd(-27)
t.pd()
t.seth(-160)
t.circle(300,15)
t.pu()
t.seth(90)
t.fd(15)
t.seth(0)
t.fd(0)
t.pd()
t.seth(-10)
t.circle(-20,90)
t.pu()
t.seth(90)
t.fd(30)
t.seth(0)
t.fd(237)
t.pd()
t.seth(-20)
t.circle(-300,15)
t.pu()
t.seth(90)
t.fd(20)
t.seth(0)
t.fd(0)
t.pd()
t.seth(-170)
t.circle(20,90)
#腳
t.pensize(10)
t.color((240,128,128))
t.pu()
t.seth(90)
t.fd(-75)
t.seth(0)
t.fd(-180)
t.pd()
t.seth(-90)
t.fd(40)
t.seth(-180)
t.color("black")
t.pensize(15)
t.fd(20)
t.pensize(10)
t.color((240,128,128))
t.pu()
t.seth(90)
t.fd(40)
t.seth(0)
t.fd(90)
t.pd()
t.seth(-90)
t.fd(40)
t.seth(-180)
t.color("black")
t.pensize(15)
t.fd(20)
# 尾巴
t.pensize(4)
t.color((255,155,192))
t.pu()
t.seth(90)
t.fd(70)
t.seth(0)
t.fd(95)
t.pd()
t.seth(0)
t.circle(70,20)
t.circle(10,330)
t.circle(70,30)

4.風和日麗圖

# coding=utf-8
# code by me
 
# 引用海龜庫以及隨機庫
import turtle as t
import random
import time
 
light = t.Turtle(visible=False)
wind = t.Turtle(visible=False)
 
def canvas(size_x=1200, size_y=900):  # 設置畫布,有默認值
    t.setup(size_x, size_y)
 
# 設置線的顏色以及size
def pencil(size=5, color="black"):
    t.pensize(size)
    t.pencolor(color)
 
def sun():  # 繪制太陽
    light.pensize(5)
    light.pencolor("black")
    sec = int(time.time())
    t.penup()  # 畫紅色點
    t.goto(-530, 310)
    t.pendown()
    t.dot(100, "red")
    for i in range(1, 19):  # 陽光效果
        light.penup()
        light.goto(-530, 310)
        light.seth(i * 20)
        light.forward(55)
        light.pendown()
        if (i + sec) % 2 == 1:
            light.forward(15)
        else:
            light.forward(7)
 
 
def plant():  # 繪制天空以及大地
    t.penup()  # 每個繪制函數開頭都寫了這個,防止龜龜繪制另外的圖像移動時留下痕跡
    length = 900 * 0.318  # 將畫布的縱向黃金分割
    t.home()
    t.goto(600, -450)
 
    t.fillcolor("#DAA520")  # 分割填充大地
    t.begin_fill()
    t.left(90)
    t.forward(length)
    t.left(90)
    t.forward(1200)
    t.left(90)
    t.forward(length)
    t.left(90)
    t.forward(1200)
    t.end_fill()
 
    t.home()  # 填充天空
    t.goto(600, length - 450)
    t.fillcolor("#B0C4DE")
    t.begin_fill()
    t.left(90)
    t.forward(900 - length)
    t.left(90)
    t.forward(1200)
    t.left(90)
    t.forward(900 - length)
    t.left(90)
    t.forward(1200)
    t.end_fill()
 
 
def butterfly(pos_x=0, pos_y=0):  # 繪制蝴蝶,這里會隨機生成位置以及蝴蝶大小、顏色
    light.penup()
    light.goto(pos_x, pos_y)
    light.pendown()
    light.pensize(2)
    light.seth(45)
 
    color = ["#FF00FF", "#87CEFA", "#0000EE", "#FF4500", "#00FF00", "#00E5EE", "#FFFAFA"]  # 一個顏色表,以及size表
    size = [6, 7, 8, 9, 10, 11, 12]
    tep_size = random.choice(size)
    light.fillcolor(random.choice(color))
    light.begin_fill()
    light.circle(tep_size, 270)  # 繪制翅膀
    light.right(135)
 
    light.pensize(3)
    light.forward(tep_size / 2)
    light.right(45)
    light.forward(tep_size / 2)
    light.back(tep_size / 2)
    light.left(70)
    light.forward(tep_size / 2)
    light.back(tep_size / 2)
    light.right(25)
    light.pensize(4)
    light.back(2.05 * tep_size)
 
    light.seth(-90)
    light.pensize(2)
    light.circle(tep_size, -180)
    light.pensize(4)
    light.left(90)
    light.forward(tep_size * 2)
    light.back(tep_size * 2.5)
    light.end_fill()
 
def botany(pos_x=0, pos_y=0, direction=0, flower=1, bend=10):  # 植物函數,繪制向日葵,向日葵會迎風倒,效果很到位
    light.pensize(3)
    light.pencolor("black")
    light.penup()
    light.goto(pos_x, pos_y)
    light.pendown()
    light.left(90)
    light.fillcolor("#00CD00")
    light.begin_fill()
 
    light.circle(50, 90)  # 繪制葉片
    light.left(90)
    light.circle(50, 90)
 
    light.penup()
    light.goto(pos_x, pos_y)
    light.pendown()
 
    light.seth(-90)
    light.pensize(6)
    light.forward(50)
    light.back(50)
 
    light.pensize(3)
    light.circle(50, -90)
    light.right(90)
    light.circle(50, -90)
    light.end_fill()
    if flower:  # 判斷是否有花,這里默認有花
        light.penup()
        light.goto(pos_x, pos_y)
        light.pendown()
        light.pensize(4)
        if direction:
            light.seth(80)  # 繪制稈
            light.circle(130 - 5 * bend, 70 + 5 * bend, None)
        else:
            light.seth(-80)
            light.circle(130 - 5 * bend, -70 - 5 * bend, None)
            light.right(180)
        tep_x, tep_y = light.xcor(), light.ycor()
        light.forward(13)
        light.right(30)
        for i in range(6):  # 繪制花瓣
            light.fillcolor("#FFD700")
            light.begin_fill()
            light.circle(15, 300)
            light.left(120)
            light.end_fill()
        light.goto(tep_x, tep_y)
        light.dot(36, "#FFB90F")
 
def cloud(pos_x=0, pos_y=0, size=20):  # 繪制云
    pos = int(time.time())
    pos %= 50
    light.penup()  # 云沒有要邊框,所以沒有pendown
    light.goto(pos*8+pos_x, pos_y)
 
    light.fillcolor("#E6E6FA")
    light.begin_fill()
    light.seth(-80)
    light.circle(size, 110)
    for i in range(1, 6):  # 繪制下半部分
        light.right(100)
        light.circle(size, 110)
    light.left(120)
    for i in range(1, 7):  # 繪制上半部分,上邊進行了六次循環,但是之前就進行了一次繪制,這里有七次循環
        light.right(100)
        light.circle(size, 110)
    light.end_fill()
 
# def draw(x, y):                               # 這里是之前調試用的拖拽函數響應函數,不需使用
#     t.goto(x, y)
#     print(t.xcor(), t.ycor())
 
 
# def person(pos_x=0, pos_y=0):                 # 繪制人的函數,效果很拉跨,舍棄
#     t.penup()
#     t.goto(pos_x, pos_y)
#     t.pendown()
#
#     t.dot(44, "#FFDEAD")
#     t.right(90)
#     t.penup()
#     t.forward(25)
#     t.right(15)
#     t.pendown()
#     pencil(10)
#     t.forward(50)
#
#     t.right(35)
#     t.forward(50)
#     t.back(50)
#     t.left(90)
#     t.forward(27)
#     t.right(110)
#     t.forward(23)
#
#     t.penup()
#     t.goto(pos_x, pos_y)
#     t.seth(-90)
#     t.forward(25)
#     t.right(15)
#     t.forward(20)
#     t.right(60)
#     t.pendown()
#     t.forward(50)
#     tep_x1, tep_y1 = t.xcor(), t.ycor()
#     t.back(50)
#     t.right(160)
#     t.forward(30)
#     t.seth(90)
#     t.forward(20)
#
#     t.penup()
#     t.goto(tep_x1, tep_y1)
#     t.seth(-145)
#     pencil(6)
#     t.pendown()
#     t.forward(50)
#     t.right(90)
#     t.forward(20)
#     t.right(90)
#     t.forward(15)
#     t.right(90)
#     t.forward(20)
#     t.left(90)
#     t.forward(150)
 
def star(pos_x=0, pos_y=0, size=10):  # 繪制星星函數
    color = ["#FFFFE0", "#FFFF00"]
    light.penup()
    light.goto(pos_x, pos_y)
    angle = random.randint(0, 180)
    light.seth(angle)
    light.fillcolor(random.choice(color))
    light.begin_fill()
    for i in range(5):  # 這個144度是查的資料
        light.right(144)
        light.forward(size)
    light.end_fill()
 
 
def wind():  # 風函數,讓圖像看起來更有感覺,就是一條直線,加兩個圓
    pos = int(time.time())
    pos %= 5
    color = ["#D3D3D3", "#CDCDB4"]
    tep_color = random.choice(color)
    light.penup()
    light.goto(pos*80-1000, 50)
    light.seth(0)
    light.pendown()
    light.pensize(5)
    light.pencolor(tep_color)
    light.forward(500)
    light.pensize(4)
    light.pencolor(tep_color)
    light.left(45)
    light.circle(50, 180)
    light.pensize(3)
    light.pencolor(tep_color)
    light.circle(30, 90)
 
    tep_color = random.choice(color)
    light.penup()  # 畫圈圈
    light.goto(pos*140-1040, 80)
    light.seth(0)
    light.pendown()
    light.pensize(5)
    light.pencolor(tep_color)
    light.forward(400)
    light.pensize(4)
    light.pencolor(tep_color)
    light.left(45)
    light.circle(40, 180)
    light.pensize(3)
    light.pencolor(tep_color)
    light.circle(25, 90)
 
 
def lie():  # 這個函數是表達我對python的喜愛
    t.penup()
    t.goto(0, -360)
    pencil(0, "#FFA54F")
    t.write("節日快樂", align='center', font=('arial', 75, 'normal'))
    t.hideturtle()
 
 
def dynamic():
    light.clear()
    sun()
    star(200, 200)  # 右上角有星星注意觀察 0.0
    star(260, 230, 15)
    star(180, 300)
    star(300, 100, 15)
    star(500, 290)
    star(420, 310, 15)
    star(300, 200)
    star(260, 230, 15)
    star(350, 352)
    star(500, 180, 15)
    star(560, 352)
    cloud(-530, 280, 20)
    cloud(300, 250, 30)
    wind()
 
    bend = int(time.time())
    bend %= 5
    bend += 14
    light.seth(-100-bend)  # 初始向日葵葉片角度
    for i in range(14):  # 生成向日葵
 
        if i % 2 == 0:
            botany(-520 + i * 50, -132, 0, 1, bend - i)
            botany(-340 + i * 50, -132, 0, 1, bend - i)
        else:
            botany(-430 + i * 50, -142, 0, 1, bend - i)
            botany(-230 + i * 50, -142, 0, 1, bend - i)
    pos_x = [45, -96, -100, 410, 300, 580, 230, -50, -400, -320, -212]
    pos_y = [45, -96, -100, 0, 20, 30, 29, -50, -20, -43, 10]
    for i in range(6):  # 生成蝴蝶,這里便于觀察到結果,蝴蝶有點大
        butterfly(random.choice(pos_x), random.choice(pos_y))
    t.ontimer(dynamic, 1000)
 
def piant():  # 這里是將繪制全放在這個函數里,讓main看起來簡潔
    t.tracer(False)
    t.delay(0)
    canvas()
    pencil()
    plant()
    lie()
    dynamic()
 
 
if __name__ == "__main__":
    piant()
    # t.ondrag(draw, btn=1, add=None)
    t.mainloop()
 

總結

到此這篇關于Python海龜turtle基礎知識大全以及畫圖集合的文章就介紹到這了,更多相關Python海龜turtle繪圖內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!

相關文章

  • 如何更改jupyter的默認文件路徑

    如何更改jupyter的默認文件路徑

    這篇文章主要介紹了如何更改jupyter的默認文件路徑問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
    2023-12-12
  • 查看端口并殺進程python腳本代碼

    查看端口并殺進程python腳本代碼

    今天小編就為大家分享一篇查看端口并殺進程python腳本代碼,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧
    2019-12-12
  • python 打印出所有的對象/模塊的屬性(實例代碼)

    python 打印出所有的對象/模塊的屬性(實例代碼)

    下面小編就為大家?guī)硪黄猵ython 打印出所有的對象/模塊的屬性(實例代碼)。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2016-09-09
  • 使用selenium模擬登錄解決滑塊驗證問題的實現

    使用selenium模擬登錄解決滑塊驗證問題的實現

    這篇文章主要介紹了使用selenium模擬登錄解決滑塊驗證問題的實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2019-05-05
  • python實現學生管理系統源碼

    python實現學生管理系統源碼

    這篇文章主要為大家詳細介紹了python實現學生管理系統源碼,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2021-04-04
  • Python實現以時間換空間的緩存替換算法

    Python實現以時間換空間的緩存替換算法

    緩存是指可以進行高速數據交換的存儲器,它先于內存與CPU交換數據,因此速度很快。緩存就是把一些數據暫時存放于某些地方,可能是內存,也有可能硬盤。下面給大家介紹Python實現以時間換空間的緩存替換算法,需要的朋友參考下
    2016-02-02
  • Python 數據可視化之Seaborn詳解

    Python 數據可視化之Seaborn詳解

    這篇文章主要介紹了Python數據可視化庫seaborn的使用總結,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2021-11-11
  • python 類對象和實例對象動態添加方法(分享)

    python 類對象和實例對象動態添加方法(分享)

    下面小編就為大家分享一篇python 類對象和實例對象動態添加方法。具有很的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧
    2017-12-12
  • Python+Opencv實現表格邊框線檢測

    Python+Opencv實現表格邊框線檢測

    Python數據開發工作時偶爾會要求對圖片做邊框線檢查和圖片中的直線,本文為大家整理了相關的實現方法,非常實用,建議有需要的小伙伴收藏一下
    2023-05-05
  • Python基于pygame實現圖片代替鼠標移動效果

    Python基于pygame實現圖片代替鼠標移動效果

    這篇文章主要介紹了Python基于pygame實現圖片代替鼠標移動效果,可實現將鼠標箭頭轉換成圖形的功能,涉及pygame圖形操作的相關技巧,具有一定參考借鑒價值,需要的朋友可以參考下
    2015-11-11

最新評論