Python中itertools模塊用法詳解
本文實例講述了Python中itertools模塊用法,分享給大家供大家參考。具體分析如下:
一般來說,itertools模塊包含創建有效迭代器的函數,可以用各種方式對數據進行循環操作,此模塊中的所有函數返回的迭代器都可以與for循環語句以及其他包含迭代器(如生成器和生成器表達式)的函數聯合使用。
chain(iter1, iter2, ..., iterN):
給出一組迭代器(iter1, iter2, ..., iterN),此函數創建一個新迭代器來將所有的迭代器鏈接起來,返回的迭代器從iter1開始生成項,知道iter1被用完,然后從iter2生成項,這一過程會持續到iterN中所有的項都被用完。
from itertools import chain test = chain('AB', 'CDE', 'F') for el in test: print el A B C D E F
chain.from_iterable(iterables):
一個備用鏈構造函數,其中的iterables是一個迭代變量,生成迭代序列,此操作的結果與以下生成器代碼片段生成的結果相同:
>>> def f(iterables): for x in iterables: for y in x: yield y >>> test = f('ABCDEF') >>> test.next() 'A' >>> from itertools import chain >>> test = chain.from_iterable('ABCDEF') >>> test.next() 'A'
combinations(iterable, r):
創建一個迭代器,返回iterable中所有長度為r的子序列,返回的子序列中的項按輸入iterable中的順序排序:
>>> from itertools import combinations >>> test = combinations([1,2,3,4], 2) >>> for el in test: print el (1, 2) (1, 3) (1, 4) (2, 3) (2, 4) (3, 4)
count([n]):
創建一個迭代器,生成從n開始的連續整數,如果忽略n,則從0開始計算(注意:此迭代器不支持長整數),如果超出了sys.maxint,計數器將溢出并繼續從-sys.maxint-1開始計算。
cycle(iterable):
創建一個迭代器,對iterable中的元素反復執行循環操作,內部會生成iterable中的元素的一個副本,此副本用于返回循環中的重復項。
dropwhile(predicate, iterable):
創建一個迭代器,只要函數predicate(item)為True,就丟棄iterable中的項,如果predicate返回False,就會生成iterable中的項和所有后續項。
def dropwhile(predicate, iterable): # dropwhile(lambda x: x<5, [1,4,6,4,1]) --> 6 4 1 iterable = iter(iterable) for x in iterable: if not predicate(x): yield x break for x in iterable: yield x
groupby(iterable [,key]):
創建一個迭代器,對iterable生成的連續項進行分組,在分組過程中會查找重復項。
如果iterable在多次連續迭代中生成了同一項,則會定義一個組,如果將此函數應用一個分類列表,那么分組將定義該列表中的所有唯一項,key(如果已提供)是一個函數,應用于每一項,如果此函數存在返回值,該值將用于后續項而不是該項本身進行比較,此函數返回的迭代器生成元素(key, group),其中key是分組的鍵值,group是迭代器,生成組成該組的所有項。
ifilter(predicate, iterable):
創建一個迭代器,僅生成iterable中predicate(item)為True的項,如果predicate為None,將返回iterable中所有計算為True的項。
ifilter(lambda x: x%2, range(10)) --> 1 3 5 7 9
ifilterfalse(predicate, iterable):
創建一個迭代器,僅生成iterable中predicate(item)為False的項,如果predicate為None,則返回iterable中所有計算為False的項。
ifilterfalse(lambda x: x%2, range(10)) --> 0 2 4 6 8
imap(function, iter1, iter2, iter3, ..., iterN)
創建一個迭代器,生成項function(i1, i2, ..., iN),其中i1,i2...iN分別來自迭代器iter1,iter2 ... iterN,如果function為None,則返回(i1, i2, ..., iN)形式的元組,只要提供的一個迭代器不再生成值,迭代就會停止。
>>> from itertools import * >>> d = imap(pow, (2,3,10), (5,2,3)) >>> for i in d: print i 32 9 1000 #### >>> d = imap(pow, (2,3,10), (5,2)) >>> for i in d: print i 32 9 #### >>> d = imap(None, (2,3,10), (5,2)) >>> for i in d : print i (2, 5) (3, 2)
islice(iterable, [start, ] stop [, step]):
創建一個迭代器,生成項的方式類似于切片返回值: iterable[start : stop : step],將跳過前start個項,迭代在stop所指定的位置停止,step指定用于跳過項的步幅。與切片不同,負值不會用于任何start,stop和step,如果省略了start,迭代將從0開始,如果省略了step,步幅將采用1.
def islice(iterable, *args): # islice('ABCDEFG', 2) --> A B # islice('ABCDEFG', 2, 4) --> C D # islice('ABCDEFG', 2, None) --> C D E F G # islice('ABCDEFG', 0, None, 2) --> A C E G s = slice(*args) it = iter(xrange(s.start or 0, s.stop or sys.maxint, s.step or 1)) nexti = next(it) for i, element in enumerate(iterable): if i == nexti: yield element nexti = next(it) #If start is None, then iteration starts at zero. If step is None, then the step defaults to one. #Changed in version 2.5: accept None values for default start and step.
izip(iter1, iter2, ... iterN):
創建一個迭代器,生成元組(i1, i2, ... iN),其中i1,i2 ... iN 分別來自迭代器iter1,iter2 ... iterN,只要提供的某個迭代器不再生成值,迭代就會停止,此函數生成的值與內置的zip()函數相同。
def izip(*iterables): # izip('ABCD', 'xy') --> Ax By iterables = map(iter, iterables) while iterables: yield tuple(map(next, iterables))
izip_longest(iter1, iter2, ... iterN, [fillvalue=None]):
與izip()相同,但是迭代過程會持續到所有輸入迭代變量iter1,iter2等都耗盡為止,如果沒有使用fillvalue關鍵字參數指定不同的值,則使用None來填充已經使用的迭代變量的值。
def izip_longest(*args, **kwds): # izip_longest('ABCD', 'xy', fillvalue='-') --> Ax By C- D- fillvalue = kwds.get('fillvalue') def sentinel(counter = ([fillvalue]*(len(args)-1)).pop): yield counter() # yields the fillvalue, or raises IndexError fillers = repeat(fillvalue) iters = [chain(it, sentinel(), fillers) for it in args] try: for tup in izip(*iters): yield tup except IndexError: pass
permutations(iterable [,r]):
創建一個迭代器,返回iterable中所有長度為r的項目序列,如果省略了r,那么序列的長度與iterable中的項目數量相同:
def permutations(iterable, r=None): # permutations('ABCD', 2) --> AB AC AD BA BC BD CA CB CD DA DB DC # permutations(range(3)) --> 012 021 102 120 201 210 pool = tuple(iterable) n = len(pool) r = n if r is None else r if r > n: return indices = range(n) cycles = range(n, n-r, -1) yield tuple(pool[i] for i in indices[:r]) while n: for i in reversed(range(r)): cycles[i] -= 1 if cycles[i] == 0: indices[i:] = indices[i+1:] + indices[i:i+1] cycles[i] = n - i else: j = cycles[i] indices[i], indices[-j] = indices[-j], indices[i] yield tuple(pool[i] for i in indices[:r]) break else: return
product(iter1, iter2, ... iterN, [repeat=1]):
創建一個迭代器,生成表示item1,item2等中的項目的笛卡爾積的元組,repeat是一個關鍵字參數,指定重復生成序列的次數。
def product(*args, **kwds): # product('ABCD', 'xy') --> Ax Ay Bx By Cx Cy Dx Dy # product(range(2), repeat=3) --> 000 001 010 011 100 101 110 111 pools = map(tuple, args) * kwds.get('repeat', 1) result = [[]] for pool in pools: result = [x+[y] for x in result for y in pool] for prod in result: yield tuple(prod)
repeat(object [,times]):
創建一個迭代器,重復生成object,times(如果已提供)指定重復計數,如果未提供times,將無止盡返回該對象。
def repeat(object, times=None): # repeat(10, 3) --> 10 10 10 if times is None: while True: yield object else: for i in xrange(times): yield object
starmap(func [, iterable]):
創建一個迭代器,生成值func(*item),其中item來自iterable,只有當iterable生成的項適用于這種調用函數的方式時,此函數才有效。
def starmap(function, iterable): # starmap(pow, [(2,5), (3,2), (10,3)]) --> 32 9 1000 for args in iterable: yield function(*args)
takewhile(predicate [, iterable]):
創建一個迭代器,生成iterable中predicate(item)為True的項,只要predicate計算為False,迭代就會立即停止。
def takewhile(predicate, iterable): # takewhile(lambda x: x<5, [1,4,6,4,1]) --> 1 4 for x in iterable: if predicate(x): yield x else: break
tee(iterable [, n]):
從iterable創建n個獨立的迭代器,創建的迭代器以n元組的形式返回,n的默認值為2,此函數適用于任何可迭代的對象,但是,為了克隆原始迭代器,生成的項會被緩存,并在所有新創建的迭代器中使用,一定要注意,不要在調用tee()之后使用原始迭代器iterable,否則緩存機制可能無法正確工作。
def tee(iterable, n=2): it = iter(iterable) deques = [collections.deque() for i in range(n)] def gen(mydeque): while True: if not mydeque: # when the local deque is empty newval = next(it) # fetch a new value and for d in deques: # load it to all the deques d.append(newval) yield mydeque.popleft() return tuple(gen(d) for d in deques) #Once tee() has made a split, the original iterable should not be used anywhere else; otherwise, the iterable could get advanced without the tee objects being informed. #This itertool may require significant auxiliary storage (depending on how much temporary data needs to be stored). In general, if one iterator uses most or all of the data before another iterator starts, it is faster to use list() instead of tee().
相信本文所述對大家Python程序設計的學習有一定的借鑒價值。
相關文章
python中Tkinter詳細基礎教學實例代碼
這篇文章主要給大家介紹了關于python中Tkinter詳細基礎教學的相關資料,文中介紹了如Label、Button、Entry、Text、Frame、Menu、Canvas、Messagebox等的基本屬性和用法,并介紹了布局管理器pack、grid和place的使用方法,需要的朋友可以參考下2024-12-12對Python中GIL(全局解釋器鎖)的一點理解淺析
首先需要明確的一點是GIL并不是Python的特性,它是在實現Python解析器(CPython)時所引入的一個概念,下面這篇文章主要給大家介紹了關于對Python中GIL的一點理解,文中通過示例代碼介紹的非常詳細,需要的朋友可以參考下2022-05-05opencv-python+yolov3實現目標檢測
因?yàn)樽罱娜蝿?wù)有用到目標檢測,快速地了解了目標檢測這一任務,并且實現了使用opencv進行目標檢測。感興趣的可以了解一下2021-06-06python語言中pandas字符串分割str.split()函數
分列在我們?nèi)粘9ぷ髦薪?jīng)常用到,從各種系統中導出的什么訂單號、名稱、日期很多都是復合組成的,這些列在匹配、合并時沒有辦法使用,我們經常需要將她們分開,下面這篇文章主要給大家介紹了關于python語言中pandas字符串分割str.split()函數的相關資料,需要的朋友可以參考下2022-08-08flask 實現token機制的示例代碼
這篇文章主要介紹了flask 實現token機制的示例代碼,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2019-11-11解決Pyinstaller 打包exe文件 取消dos窗口(黑框框)的問題
今天小編就為大家分享一篇解決Pyinstaller 打包exe文件 取消dos窗口(黑框框)的問題,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2019-06-06python更新數據庫中某個字段的數據(方法詳解)
這篇文章主要介紹了python更新數據庫中某個字段的數據方法,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-11-11python讀取圖像矩陣文件并轉換為向量實例
這篇文章主要介紹了python讀取圖像矩陣文件并轉換為向量實例,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2020-06-06一文教會你用Python實現pdf轉word
python實現pdf轉word,支持中英文轉換,轉換精度高,可以達到使用效果,下面這篇文章主要給大家介紹了關于用Python實現pdf轉word的相關資料,需要的朋友可以參考下2023-01-01