Python中的ConfigParser模塊使用詳解
1.基本的讀取配置文件
-read(filename) 直接讀取ini文件內容
-sections() 得到所有的section,并以列表的形式返回
-options(section) 得到該section的所有option
-items(section) 得到該section的所有鍵值對
-get(section,option) 得到section中option的值,返回為string類型
-getint(section,option) 得到section中option的值,返回為int類型,還有相應的getboolean()和getfloat() 函數。
2.基本的寫入配置文件
-add_section(section) 添加一個新的section
-set( section, option, value) 對section中的option進行設置,需要調用write將內容寫入配置文件。
3.基本例子
test.conf [sec_a] a_key1 = 20 a_key2 = 10 [sec_b] b_key1 = 121 b_key2 = b_value2 b_key3 = $r b_key4 = 127.0.0.1
parse_test_conf.py import ConfigParser cf = ConfigParser.ConfigParser() #read config cf.read("test.conf") # return all section secs = cf.sections() print 'sections:', secs opts = cf.options("sec_a") print 'options:', opts kvs = cf.items("sec_a") print 'sec_a:', kvs #read by type str_val = cf.get("sec_a", "a_key1") int_val = cf.getint("sec_a", "a_key2") print "value for sec_a's a_key1:", str_val print "value for sec_a's a_key2:", int_val #write config #update value cf.set("sec_b", "b_key3", "new-$r") #set a new value cf.set("sec_b", "b_newkey", "new-value") #create a new section cf.add_section('a_new_section') cf.set('a_new_section', 'new_key', 'new_value') #write back to configure file cf.write(open("test.conf", "w"))
得到終端輸出:
sections: ['sec_b', 'sec_a'] options: ['a_key1', 'a_key2'] sec_a: [('a_key1', "i'm value"), ('a_key2', '22')] value for sec_a's a_key1: i'm value value for sec_a's a_key2: 22
更新后的test.conf
[sec_b] b_newkey = new-value b_key4 = 127.0.0.1 b_key1 = 121 b_key2 = b_value2 b_key3 = new-$r [sec_a] a_key1 = i'm value a_key2 = 22 [a_new_section] new_key = new_value
4.Python的ConfigParser Module中定義了3個類對INI文件進行操作。分別是RawConfigParser、ConfigParser、SafeConfigParser。RawCnfigParser是最基礎的INI文件讀取類,ConfigParser、SafeConfigParser支持對%(value)s變量的解析。
設定配置文件test2.conf
[portal] url = http://%(host)s:%(port)s/Portal host = localhost port = 8080
使用RawConfigParser:
import ConfigParser cf = ConfigParser.RawConfigParser() print "use RawConfigParser() read" cf.read("test2.conf") print cf.get("portal", "url") print "use RawConfigParser() write" cf.set("portal", "url2", "%(host)s:%(port)s") print cf.get("portal", "url2")
得到終端輸出:
use RawConfigParser() read http://%(host)s:%(port)s/Portal use RawConfigParser() write %(host)s:%(port)s
改用ConfigParser:
import ConfigParser cf = ConfigParser.ConfigParser() print "use ConfigParser() read" cf.read("test2.conf") print cf.get("portal", "url") print "use ConfigParser() write" cf.set("portal", "url2", "%(host)s:%(port)s") print cf.get("portal", "url2")
得到終端輸出:
use ConfigParser() read http://localhost:8080/Portal use ConfigParser() write localhost:8080
改用SafeConfigParser:
import ConfigParser cf = ConfigParser.SafeConfigParser() print "use SafeConfigParser() read" cf.read("test2.conf") print cf.get("portal", "url") print "use SateConfigParser() write" cf.set("portal", "url2", "%(host)s:%(port)s") print cf.get("portal", "url2")
得到終端輸出(效果同ConfigParser):
use SafeConfigParser() read http://localhost:8080/Portal use SateConfigParser() write localhost:8080
相關文章
從零學Python之入門(五)縮進和選擇
空白在Python中是重要的。事實上行首的空白是重要的。它稱為縮進。在邏輯行首的空白(空格和制表符)用來決定邏輯行的縮進層次,從而用來決定語句的分組。2014-05-05python 字符串轉列表 list 出現\ufeff的解決方法
下面小編就為大家?guī)硪黄猵ython 字符串轉列表 list 出現\ufeff的解決方法。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-06-06Python常見錯誤:IndexError:?list?index?out?of?range解決
最近在寫一個爬蟲程序,但是卻出現了錯誤提示IndexError:?list?index?out?of?range,所以下面這篇文章主要給大家介紹了關于Python常見錯誤:IndexError:?list?index?out?of?range的解決方法,需要的朋友可以參考下2023-01-01Python數據分析之彩票的歷史數據
這篇文章主要介紹了Python數據分析之彩票的歷史數據,文中有非常詳細的代碼示例,對正在學習python的小伙伴們有非常好的幫助,需要的朋友可以參考下2021-04-04python實現socket客戶端和服務端簡單示例
這篇文章主要介紹了python實現socket客戶端和服務端簡單示例,需要的朋友可以參考下2014-02-02